Have a touch screen industry, there are embedded wince system, comes with a USB from the station, I want to use the vc programming, after plugged into the computer, hard disk write a text file to touch screen, now through USB enumeration is the USB device can find the wince, no drive, but I don't know how to programmatically, to write the files on the hard disk, hope someone can indicate the direction, if there is a example appreciate,

CodePudding user response:

No drive, screen means that the industry as a usb storage devices attached to your computer, you want to write files via usb command to industrial screen, industrial screen with instructions to support at least, you don't know what instruction and communication format, this road impassability, this device has a driver can flash commonly, teardown you see master control board, and then find the appropriate driver try again,

CodePudding user response:

reference 1st floor zzbinfo response:

no drive, screen means that the industry is not as usb storage devices attached to your computer, you want to write files via usb command to industrial screen, industrial screen with instructions to support at least, you don't know what instruction and communication format, this road impassability, this device has a driver can flash commonly, teardown you see master control board, and then find the appropriate driver try again,

Main control board is what, look at the CPU? The CPU is architecture (A8 ARM

CodePudding user response:

CPU, not looking at the core board, or other useful information on the PCB, this will thumb, send a high-definition pictures and have a look