O idea or recommend books
1, how to do the factory electronic map
2, how to define the map area
3, the location of the goods how to show on the map processing
4, how to counter check the goods on the map

CodePudding user response:

His top!

CodePudding user response:

Factory will not be able to use the GPS, I do know some near field positioning communications hardware products, but a few years ago still not mature, not the transition, the function is unitary
Don't know if the last few years have good development, the factory map can direct proportion with examples images

CodePudding user response:

Simply get a local map images, X, Y coordinates to latitude and longitude,
Powerful point with such as mapinfo map, using mapx control,
Get a map, you can reference I many years ago I wrote a simple map controls, check my post is,

Positioning, a lot of kinds: GPS, mobile signal, positioning rods (mine personnel positioning with the),

CodePudding user response:

CDSoftwareWj
Themselves with pictures how ah, please clear point, give me some ideas to
In picture 1, how to coordinate the
2, the coordinates, how to define the
3, how to define the image on a small piece of area for a department, the database how to
I am a rookie

CodePudding user response:

Leeky
I don't want the latitude and longitude, as long as the image division multiple regions, the icon (on behalf of the goods) is shown in the picture the corresponding area

CodePudding user response:

You edit a simple reproduction of images as a map, the icon (goods) is dynamically generated images is put on the reproduction,

1, can use a TImage control, set the picture editor for you good image reproduction,
2, dynamically generated each icon (goods),
3, TImage control the onm ouseMove event of X, Y coordinates of the mouse coordinates, which icon, you will know the mouse is currently in,

CodePudding user response:

On the drawing ICONS, see my post:
http://bbs.csdn.net/topics/80304454
Main function:
Procedure DrawSymbol (PosNo, X, Y: integer);
This control is realized the painting ICONS: transformer, electric pole and so on,

Icon array is:
EquipSymbols: an array of TBitmap;

I hope it can help you, still need to take some time to study,

CodePudding user response:

When I was doing the palace location, also is to use a common tourist map of the imperial palace, very simple
Positioning of the point, also is very simple, installed, there probably is in the x, y coordinates of image annotation, later to the location, the coverage of the area can show
The Angle of x, y coordinates of the picture, can be combined into a region, in fact, we use a more simple method, because in an area only a positioning device
So, as long as the device receives the signal, we believe that things in this area, don't need a special fine XY point and area

Upstairs leeky actually also made it very clear, do you think about what

CodePudding user response:

Now can use the mobile phone bluetooth positioning

CodePudding user response:

references 9 f Playmaster response:

can now use mobile phone bluetooth positioning

What is this bluetooth? Covering a factory?

Really?

CodePudding user response:

The

refer to the original poster elite01 response:

o ideas or recommend books
1, how to do the factory electronic map
2, how to define the map area
3, the location of the goods how to show on the map processing
4, how to counter check the goods on the map

This is a question of relative coordinates,
GPS devices are commonly used the X, Y, Z coordinates system, represent the horizontal, vertical, altitude (at that time forgot HengShi longitude and latitude ), it is said that the level of the big dipper is real-time data, the other is to calculate the data of GPS elevation of,

Thinking:
A, define the factory map coordinates system
1. Choose reference point
1.1 measuring center, for example in office as the center, where the office to obtain a GPS data, and records in the database
1.2 measuring boundary point -- -- take several key points, the walls of the factory and get the GPS data and records in the database
2. Select scale
3. Custom factory map
According to the reference points of the previous measuring 3.1 X coordinate difference/wide scale as a BMP image, Y coordinate difference/high scale as a BMP image, create a BMP file - that is, to establish a coordinate layer
3.2 aerial factory pictures, make the floor plan of the buildings and ground layer reference point MATCH, slightly clipping, PS, create a BMP file - that is, to establish a factory plane layer
According to the coordinates of the layer of 3.1, and 3.3 to trace the dots a blank layer
Second, the establishment of database
The main layer is to establish the labeling of the database, so that it can be through a database quickly locate to the corresponding standard,
Then plot layer data associated with your database warehouse goods, to complete the task