Home > Back-end >  Visual Studio can be used to modify the C Builder development program?
Visual Studio can be used to modify the C Builder development program?

Time:10-24

The company need to change development IDE, before the use of BCB development program, whether can use Visual Studio to modify?
If you can, need how to modify the configuration?
Thank you very much!

CodePudding user response:

If using a standard library of pure algorithm such as code, should be, if use the CB their own libraries such as the VCL, is difficult

CodePudding user response:

Use the VCL if you don't want to, there are a lot of cb has a wonderful work did not change precompiled directives

CodePudding user response:

VC can be opened by BCB, BCB VC basic won't open, unless you don't use the VCL

CodePudding user response:

refer to the original poster oushinhou response:
the company need to change development IDE, before the use of BCB development, whether can use Visual Studio to modify?
If you can, need how to modify the configuration?
Thank you very much!


Basically no

CodePudding user response:

Feasibility is not high,

CodePudding user response:

Basically is to redevelopment, but should progress quickly, mainly is the interface design

CodePudding user response:

Like a poor escape forever is impossible, only honest heavy knock on the code, but the original ideas can draw lessons from

CodePudding user response:

Can't

CodePudding user response:

The VCL, is can't
Because CBC and VS running library is not the same as
CBC's own development of library

CodePudding user response:

Seems it is difficult to,,,

CodePudding user response:

VS can only learn from the ground up, is a big difference VS and BCB, programming ideas are the same, learn the programming software can according to the programming ideas
  • Related