Family household is only a single fiber, there are now 100 m broadband telecommunications, now have one more mobile 200 m broadband, how to achieve a single fiber two broadband connection at the same time, let two broadband running at the same time

CodePudding user response:

Operate in the home, want to be in telecom cabinets, movement of the master to make,

CodePudding user response:

A single fiber at the same time two broadband connection is impossible, if involves two different operators, it is impossible,

CodePudding user response:

You can do is to buy a two WAN companies use routers, a router to connect two optical fibers,

CodePudding user response:

You can do is buy a mouth has two WAN companies use routers, a WAN port to a single fiber,

CodePudding user response:

In theory a single fiber can be multiplexed signal transmission (WDM), technology is not complicated, signals into the end use multiplex access multiplexer, outputs (such as your home) using multiplex isolated multiple signals, the key is who is the original cloth fiber, it can allow other broadband company reuse, need to consult

CodePudding user response:

Two operators broadband with a single fiber, do you want to! Buy more than one wan router, then call operator pull fiber door, more than double fiber by wan router is ok, if don't want to single fiber multiplex signals, make sense in theory and in reality you for telecom and mobile to make it, no willing,

CodePudding user response:

The

refer to the original poster Song Kai 13?????????? 2 reply:

family household is only a single fiber, there are now 100 m broadband telecommunications, now have one more mobile 200 m broadband, how to achieve a single fiber two broadband connection at the same time, let two broadband running at the same time

This problem only in the laboratory could exist, in real life, temporarily no discussion of meaning,

Each broadband providers will provide basic photoelectric conversion device, is light, the cat cat programming light is needed to connect to the ISP server,
If you want to connect directly with fiber optic router ISP server, between equipment may not be compatible, provoked trouble a lot of

The most direct is normal fiber optic router is not cheap, a broken garbage downward highest speed is less than 10 m uploaded less than 1 m DX broadband accounted for a resource? The router

CodePudding user response:

Operator data centre, switch to the area, to light your house cats are binding, in theory, it is very simple, don't even think about it in reality, and two light cat get a double wan router

CodePudding user response:

At the entrance is applied over a wan routing

CodePudding user response:

Have a trouble, the premise is the telecom and mobile optical AP point are in the same place, with a light two electricity optical transceiver (electric mouth will with isolation function), light cat in AP, home with multiple WAN router

CodePudding user response:

A single fiber network access two operators, unless two room equipment connected by operators, mutual cooperation!

CodePudding user response:

Huawei has a router, support two operators using a router, output is equivalent to a single fiber door, but don't know how to switch, you can go to have a look,
TPLink seemed to have a so, time is too long, can not remember clearly chu,

CodePudding user response:

What you said is much WAN router, this of course is feasible, but the meaning of the original poster is to make the two operators use the optical fiber door, simulation into a higher bandwidth network, in fact it is not enough, even if the two operators sharing a household fiber (close to zero, no operators will agree to do so), and also in two separate networks, to achieve automatic selection, still need to double WAN router,

CodePudding user response:

A single fiber, and two cats, and, unable to connect, at the same time, and still two operators,,,

CodePudding user response:

Not reality, a fiber can be multiplex, that is distinguished by agreement, you are two network signals, is not a (signal itself is not the same), a fiber to come in, how you end points signal? So not reality,

CodePudding user response:

14th floor early references to play big play nuclear response:

what you said is more WAN router, this of course is feasible, but the meaning of the original poster is to make the two operators use the optical fiber door, simulation into a higher bandwidth network, in fact it is not enough, even if the two operators sharing a household fiber (close to zero, no operators will agree to do so), and also in two separate networks, to achieve automatic selection, still need to double WAN router,

The building Lord really is not feasible, this is not a technical problem