C + + builder 6.0 open the file. BPR can, Rad studio 10.2.3 open. BPR opens a file, as shown in the figure below

CodePudding user response:

In addition to the engineering files, header files is also different, feels best new construction,

CodePudding user response:

Slightly more complicated point of project, and I have no way to directly open the compilation,
Or new construction, function, little by little, new pure code can be copied,

CodePudding user response:

Want to do modify based on the previous program, adding a few features

CodePudding user response:

You use so all third-party components, upgrade is a bit of trouble, especially VCLSkin, FastReport

CodePudding user response:

Don't know if 2010 can open 6.0 engineering? If you can, to upgrade to the first 2010, and then upgrade to 10. X.

CodePudding user response:

Hello, please upgrade to the first, 2010 in upgrading to 10.2.3, compile problem will become less?

CodePudding user response:

refer to 6th floor houzhanwublog response:

hello first to upgrade to the 2010 excuse me, the upgrade to 10.2.3, compile problem will become less?

If 2010 can upgrade 6.0 engineering, to upgrade the preservation project, can not compile, continue to upgrade to 10.2,

CodePudding user response:

The problem affects me in C Builder6 development program is to give up the upgrade

CodePudding user response:

CB rarely consider the compatibility, software upgrade is not rose from 6.0 to 2010, in the rose from 2010 to 10.3 is easy, because each version is not compatible, to 10.3 even before that didn't carry forward, but dropped to control many, each version doesn't even have a reference,

CodePudding user response:

Don't direct call bcb6 BPR,
Copies of bcb6 *. DFM, *. CPP, *. H file to the new directory;
New Xe engineering after "-" to delete the initial unit1. CPP. Again, in turn, "+" added bcb6 *. CPP

CodePudding user response:

Unfortunately tell you, it's best to create a new project, in the old engineering file added one by one, the other estimates that some controls are not compatible, and header files changed, you can find the form file header, to include the header file automatically delete all, and then save, the ide will automatically generate the header files needed to adapt to the new environment, engineering major is very miserable

CodePudding user response:

Thanks to the teacher glad