InitEPwm (void)
{
EALLOW;
SysCtrlRegs. PCLKCR0. Bit. TBCLKSYNC=0;
EDIS.
//EPWM Module 1 config - PWMA1 + PWMB1
EPwm1Regs. TBPRD=PWM_PRD;//Set the timer period
EPwm1Regs. TBPHS. Half. TBPHS=0 x0000;//Phase is 0
EPwm1Regs. TBCTR=0 x0000;//the Clear counter
//Setup TBCLK
EPwm1Regs. TBCTL. Bit. CTRMODE=TB_COUNT_UPDOWN;//Count updown
EPwm1Regs. TBCTL. Bit. PHSEN=TB_DISABLE;//Disable phase loading
EPwm1Regs. TBCTL. Bit. PRDLD=0;
EPwm1Regs. TBCTL. Bit. SYNCOSEL=TB_CTR_ZERO;
EPwm1Regs. TBCTL. Bit. HSPCLKDIV=TB_DIV1;//Clock thewire to SYSCLKOUT
EPwm1Regs. TBCTL. Bit. CLKDIV=TB_DIV1;
EPwm1Regs. TBCTL. Bit. PRDLD=0;//when the CTR=0, time base TBPRD register cycle loading shadow register values (new)
EPwm1Regs. CMPCTL. Bit. SHDWAMODE=CC_SHADOW;//Counter - compare shadow mode
EPwm1Regs. CMPCTL. Bit. SHDWBMODE=CC_SHADOW;
EPwm1Regs. CMPCTL. Bit. LOADAMODE=CC_CTR_ZERO;//the Load registers every ZERO
EPwm1Regs. CMPCTL. Bit. LOADBMODE=CC_CTR_ZERO;
//Setup compare
EPwm1Regs. CMPA. Half. CMPA=PWM_PRD/4;
EPwm1Regs. CMPB=0 XFFFF;
//Set the actions
EPwm1Regs. AQCTLA. Bit. CAU=0 x3;//Set PWM1A on Zero AQ_CLEAR
EPwm1Regs. AQCTLA. Bit. CAD=0 x3;//AQ_SET
EPwm1Regs. AQCTLB. Bit. CAU=AQ_CLEAR;//Set PWM1B on Zero
EPwm1Regs. AQCTLB. Bit. CAD=AQ_SET;
////Active Low PWMs - Setup Deadband
EPwm1Regs. DBCTL. Bit. OUT_MODE=DB_FULL_ENABLE;
EPwm1Regs. DBCTL. Bit. POLSEL=DB_ACTV_HIC;
EPwm1Regs. DBCTL. Bit. IN_MODE=0 x2.
//EPwm1Regs. DBRED=DEADTIME;
//EPwm1Regs. DBFED=DEADTIME;
//EPWM Module 2 config - PWMA2 + PWMB2
EPwm2Regs. TBPRD=PWM_PRD;//Set the timer period
EPwm2Regs. TBPHS. Half. TBPHS=0 x0000;//Phase is 0
EPwm2Regs. TBCTR=0 x0000;//the Clear counter
//Setup TBCLK
EPwm2Regs. TBCTL. Bit. CTRMODE=TB_COUNT_UPDOWN;//Count updown
EPwm2Regs. TBCTL. Bit. PHSEN=TB_DISABLE;//Disable phase loading
EPwm2Regs. TBCTL. Bit. SYNCOSEL=TB_CTR_ZERO;
EPwm2Regs. TBCTL. Bit. HSPCLKDIV=TB_DIV1;//Clock thewire to SYSCLKOUT
EPwm2Regs. TBCTL. Bit. CLKDIV=TB_DIV1;
EPwm2Regs. TBCTL. Bit. PRDLD=0;//when the CTR=0, time base TBPRD register cycle loading shadow register values (new)
EPwm2Regs. CMPCTL. Bit. SHDWAMODE=CC_SHADOW;//Counter - compare shadow mode
EPwm2Regs. CMPCTL. Bit. SHDWBMODE=CC_SHADOW;
EPwm2Regs. CMPCTL. Bit. LOADAMODE=CC_CTR_ZERO;//the Load registers every ZERO
EPwm2Regs. CMPCTL. Bit. LOADBMODE=CC_CTR_ZERO;
//Setup compare
//EPwm2Regs CMPA. Half. CMPA=PWM_PRD/2;
//Set the actions
EPwm2Regs. AQCTLA. Bit. CAU=0 x3;//Set PWM2A on Zero AQ_SET AQ_CLEAR
EPwm2Regs. AQCTLA. Bit. CAD=0 x3;//AQ_CLEAR AQ_SET
EPwm2Regs. AQCTLB. Bit. CAU=AQ_SET;//Set PWM2B on Zero AQ_CLEAR switch (top and bottom)
EPwm2Regs. AQCTLB. Bit. CAD=AQ_CLEAR;//AQ_SET
EALLOW;
SysCtrlRegs. PCLKCR0. Bit. TBCLKSYNC=1;//all used by enabling ePWM module synchronous TBCLK
EDIS.
////Active Low PWMs - Setup Deadband
//EPwm2Regs DBCTL. Bit. OUT_MODE=DB_FULL_ENABLE;
//EPwm2Regs DBCTL. Bit. POLSEL=DB_ACTV_HIC;
//EPwm2Regs DBCTL. Bit. IN_MODE=DBA_ALL;
//EPwm2Regs. DBRED=DEADTIME;
//EPwm2Regs. DBFED=DEADTIME;
}
CodePudding user response:
USES is HPWM, but feel some influence each other, a great god know why please?