I need to communicate via I2C to the adxl357 accelerometer and a few questions have arisen. Looking at the RP2040 sdk documentation I see that there is a special method to send data to a certain address, such as i2c_write_blocking(). Its arguments include a 7-bit address and the data to be sent. My question is, since the accelerometer needs a Read/Write bit, is it still possible to use this function? Or should I go to the alternative i2c_write_raw_blocking()?

Also, I don't understand the notation of the Read / Write bit, it is reported with R/#W, would that mean that 1 is Read while 0 is write?

Thanks in advance for the help.

CodePudding user response：

I2C addresses have 7 bits: these are sent in the high 7 bits of an 8-bit byte, and remaining bit (the least significant bit) is set to 1 for read, 0 for write.

The reason the documentation says it wants a 7-bit address is because it is telling you that the write function will left-shift the address by one and add a 1, and the read function function will left-shift the address by one and add a 0.

If it didn't tell you this you might pre-shift the address yourself, which would be wrong.