using a 32bit ARM processor to write 64bit atomic operation in assembly in user mode in a multithrea-CodePudding

I wanted to write assembly language for an atomic64bit read/write function for a multithreaded OS, however the processor I am using is 32bit (AM574x, AM576x, Sitara Processors, Cortex A15 using the ARMv7-A architecture) and it is running in user mode and it needs to stay in user mode (means disable interrupt won't work - CPSID I). In assembly is there a way to do this?

CodePudding user response：

Refer to section A3.4 “Synchronization and semaphores” of the ARM Architecture Reference Manual Armv7-A and ARMv7-R Edition (DDI 0406C).

This boils down to using the ldrexd and strexd instructions in a loop:

        @ assuming r0 holds the address, r1:r2 holds the datum to be stored
again:  ldrexd r3, r4, [r0]      @ retrieve old value, tag memory
        strexd r3, r1, r2, [r0]  @ attempt to store
        cmp    r3, #0            @ did the store succeed?
        bne    again

The ldrexd instruction is required to tag the memory for the exclusive store. It cannot be eliminated. You must perform this operation in a loop as it can spuriously fail.