CodePudding user response:

1, insert the SD card into the computer, open the PhoenixCard. Exe software
2, select the image file
3, the burning mode selection "card production", then click "burn"
4, after the burning out SD card
5, put the SD card on the board, with electricity, again after power on the board at a green light, then the indicator light out or a green light flash, slow the firmware for the burning process, when the firmware burning bright red, pull out the SD card back to electricity
Note: burning after the completion of the need to pull out the SD card, otherwise the motherboard will continue to burn after start write
Note: when using the USB memory card adapter on the computer, directly to the TF card with adapter, so you can burn; Don't have to set a big kaka set transfer time, use large set of switching cannot burn, kaka on the motherboard requires the TF card set a big kaka set used as a SD card, you can read the file, burn to the mainboard
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Copyright statement: this article to CSDN blogger (becomes) mouth of original articles, follow BY CC 4.0 - SA the copyright agreement, reproduced and this statement, please attach the original source link
The original link: https://blog.csdn.net/zxc514257857/article/details/63255348