Home > Software design >  Freeradius 3.0.20 mysql radacct tamble empty not storing logs
Freeradius 3.0.20 mysql radacct tamble empty not storing logs

Time:09-02

I am developing a small project using freeradius 3.0.20 on linux ubuntu 20.04 machine.. installed freeradius, configured mysql on default.conf... loaded virtual servers.. and my device can connect ok..

On init i can see NAS information being loaded from MYSQL table, info is stored everything ok.. client data stored in radcheck, radgroupgcheck,radgroupreply,radipool storing the cgnat ip table etc..

client device logs in with username and password all ok i can navigate on the internet with client logged in, but its not storing clients data on the accounting radacct table on the mysql... no history logs stored at all .. only thing i can see is radpostauth storing username, password xored md5 and authdate which contains the login date only.. attached below full log init from freeradius -x

if anyone can comment, or knows how to fix this configuration issue..

root@PSI-DEV:~# sudo freeradius -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "radius"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        logfile = "/var/log/freeradius/radacct/sql.log"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
        auto_escape = no
   accounting {
        reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,            acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,          acctupdatetime, acctstoptime,acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,        callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress,     framedipv6address,      framedipv6prefix, framedinterfaceid,    delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), acctstoptime = NULL, framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime        = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    = %{%{Acct-Session-Time}:-NULL}, acctinputoctets        = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        logfile = "/var/log/freeradius/post-auth.sql"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_sqlippool


 

CodePudding user response:

# Loading module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool
  sqlippool {
        sql_module_instance = "sql"
        lease_duration = 1600
        pool_name = "Pool-Name"
        default_pool = "main_pool"
        allow_duplicates = no
        attribute_name = "Framed-IP-Address"
        allocate_begin = "START TRANSACTION"
        allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE pool_key = '%{Calling-Station-Id}'"
        allocate_clear_timeout = 1
        allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND expiry_time IS NULL ORDER BY RAND() LIMIT 1 FOR UPDATE"
        allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{Calling-Station-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW()   INTERVAL 1600 SECOND WHERE framedipaddress = '%I'"
        allocate_commit = "COMMIT"
        pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
        start_begin = "START TRANSACTION"
        start_update = "UPDATE radippool SET expiry_time = NOW()   INTERVAL 1600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        start_commit = "COMMIT"
        alive_begin = "START TRANSACTION"
        alive_update = "UPDATE radippool SET expiry_time = NOW()   INTERVAL 1600 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        alive_commit = "COMMIT"
        stop_begin = "START TRANSACTION"
        stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        stop_commit = "COMMIT"
        on_begin = "START TRANSACTION"
        on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
        on_commit = "COMMIT"
        off_begin = "START TRANSACTION"
        off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
        off_commit = "COMMIT"
   messages {
        exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
        failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   }
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
        ca_file = "/etc/ssl/certs/ca-certificates.crt"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/3.0/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
        tls_max_version = ""
        tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
The configuration allows TLS 1.0 and/or TLS 1.1.  We STRONGLY recommned using only TLS 1.2 for security
Please set: min_tls_version = "1.2"
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 8.0.30
   mysql {
    tls {
        tls_required = no
        check_cert = no
        check_cert_cn = no
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 10.5.5.17 (BRAS RB4011 TEST) to global clients list
rlm_sql (10.5.5.17): Client "BRAS RB4011 TEST" (sql) added
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel

CodePudding user response:

radiusd: #### Opening IP addresses and Ports ####
    listen {
            type = "auth"
            ipaddr = *
            port = 1812
       limit {
            max_connections = 16
            lifetime = 0
            idle_timeout = 30
       }
    }
    listen {
            type = "acct"
            ipaddr = *
            port = 1813
       limit {
            max_connections = 16
            lifetime = 0
            idle_timeout = 30
       }
    }
    listen {
            type = "auth"
            ipv6addr = ::
            port = 1812
       limit {
            max_connections = 16
            lifetime = 0
            idle_timeout = 30
       }
    }
    listen {
            type = "acct"
            ipv6addr = ::
            port = 1813
       limit {
            max_connections = 16
            lifetime = 0
            idle_timeout = 30
       }
    }
    listen {
            type = "auth"
            ipaddr = 127.0.0.1
            port = 18120
    }
    Listening on auth address * port 1812 bound to server default
    Listening on acct address * port 1813 bound to server default
    Listening on auth address :: port 1812 bound to server default
    Listening on acct address :: port 1813 bound to server default
    Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
    Listening on proxy address * port 36859
    Listening on proxy address :: port 42334
    Ready to process requests
    (0) Received Access-Request Id 122 from 10.5.5.17:35276 to 10.7.7.20:1812 length 196
    (0)   Service-Type = Framed-User
    (0)   Framed-Protocol = PPP
    (0)   NAS-Port = 15743036
    (0)   NAS-Port-Type = Ethernet
    (0)   User-Name = "isptest200"
    (0)   Calling-Station-Id = "80:8B:EB:B2:73:DB"
    (0)   Called-Station-Id = "PPPOE-FIBER"
    (0)   NAS-Port-Id = "VLAN1250 - FIBER PPPOE"
    (0)   Acct-Session-Id = "81e03832"
    (0)   CHAP-Challenge = 0x5121406b2f5e153087cbb4adecd88780
    (0)   CHAP-Password = 0x019f2a968bf91f2df371a75863f391d707
    (0)   NAS-Identifier = "ROUTER PPPoE TEST"
    (0)   NAS-IP-Address = 10.5.5.17
    (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
    (0)   authorize {
    (0)     policy filter_username {
    (0)       if (&User-Name) {
    (0)       if (&User-Name)  -> TRUE
    (0)       if (&User-Name)  {
    (0)         if (&User-Name =~ / /) {
    (0)         if (&User-Name =~ / /)  -> FALSE
    (0)         if (&User-Name =~ /@[^@]*@/ ) {
    (0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
    (0)         if (&User-Name =~ /\.\./ ) {
    (0)         if (&User-Name =~ /\.\./ )  -> FALSE
    (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(. )\.(. )$/))  {
    (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(. )\.(. )$/))   -> FALSE
    (0)         if (&User-Name =~ /\.$/)  {
    (0)         if (&User-Name =~ /\.$/)   -> FALSE
    (0)         if (&User-Name =~ /@\./)  {
    (0)         if (&User-Name =~ /@\./)   -> FALSE
    (0)       } # if (&User-Name)  = notfound
    (0)     } # policy filter_username = notfound
    (0)     [preprocess] = ok
    (0) chap:   &control:Auth-Type := CHAP
    (0)     [chap] = ok
    (0)     [mschap] = noop
    (0) eap: No EAP-Message, not doing EAP
    (0)     [eap] = noop
    (0) sql: EXPAND %{User-Name}
    (0) sql:    --> isptest200
    (0) sql: SQL-User-Name set to 'isptest200'
    rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 77 seconds
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 77 seconds
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 77 seconds
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 77 seconds
    rlm_sql (sql): You probably need to lower "min"
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 77 seconds
    rlm_sql (sql): You probably need to lower "min"
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 77 seconds
    rlm_sql (sql): You probably need to lower "min"
    rlm_sql_mysql: Socket destructor called, closing socket
    rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase "spare"
    rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used
    rlm_sql_mysql: Starting connect to MySQL server
    rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
    rlm_sql (sql): Reserved connection (6)
    (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
    (0) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'isptest200' ORDER BY id
    (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'isptest200' ORDER BY id
    (0) sql: User found in radcheck table
    (0) sql: Conditional check items matched, merging assignment check items
    (0) sql:   Cleartext-Password := "123123"
    (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
    (0) sql:    --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'isptest200' ORDER BY id
    (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'isptest200' ORDER BY id
    rlm_sql (sql): 1 of 1 connections in use.  You  may need to increase "spare"
    rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used
    rlm_sql_mysql: Starting connect to MySQL server
    rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
    rlm_sql (sql): Reserved connection (7)
    rlm_sql (sql): Released connection (7)
    Need 1 more connections to reach min connections (3)
    rlm_sql (sql): Opening additional connection (8), 1 of 30 pending slots used
    rlm_sql_mysql: Starting connect to MySQL server
    rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.3.34-MariaDB-0ubuntu0.20.04.1, protocol version 10
    (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
    (0) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'isptest200' ORDER BY priority
    (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'isptest200' ORDER BY priority
    (0) sql: User found in the group table
    (0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
    (0) sql:    --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'fiber_test_500' ORDER BY id
    (0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'fiber_test_500' ORDER BY id
    (0) sql: Group "fiber_test_500": Conditional check items matched
    (0) sql: Group "fiber_test_500": Merging assignment check items
    (0) sql:   Framed-Protocol := PPP
    (0) sql:   Pool-Name := "pool_freeradiustest"
    (0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
    (0) sql:    --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'fiber_test_500' ORDER BY id
    (0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'fiber_test_500' ORDER BY id
    (0) sql: Group "fiber_test_500": Merging reply items
    (0) sql:   Mikrotik-Rate-Limit := "500M/500M"
    (0) sql:   Acct-Interim-Interval := 300
    (0) sql:   MS-Primary-DNS-Server := 192.168.16.10
    (0) sql:   MS-Secondary-DNS-Server := 192.168.16.11
    rlm_sql (sql): Released connection (6)
    (0)     [sql] = ok
    (0)     [expiration] = noop
    (0)     [logintime] = noop
    (0) pap: WARNING: Auth-Type already set.  Not setting to PAP
    (0)     [pap] = noop
    (0)   } # authorize = ok
    (0) Found Auth-Type = CHAP
    (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
    (0)   Auth-Type CHAP {
    (0) chap: Comparing with "known good" Cleartext-Password
    (0) chap: CHAP user "isptest200" authenticated successfully
    (0)     [chap] = ok
    (0)   } # Auth-Type CHAP = ok
    (0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
    (0)   post-auth {
    (0)     update {
    (0)       No attributes updated for RHS &session-state:
    (0)     } # update = noop
    (0) sql: EXPAND .query
    (0) sql:    --> .query
    (0) sql: Using query template 'query'
    rlm_sql (sql): Reserved connection (6)
    (0) sql: EXPAND %{User-Name}
    (0) sql:    --> isptest200
    (0) sql: SQL-User-Name set to 'isptest200'
    (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
    (0) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'isptest200', '0x019f2a968bf91f2df371a75863f391d707', 'Access-Accept', '2022-09-01 21:34:59')
    (0) sql: EXPAND /var/log/freeradius/post-auth.sql
    (0) sql:    --> /var/log/freeradius/post-auth.sql
    (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'isptest200', '0x019f2a968bf91f2df371a75863f391d707', 'Access-Accept', '2022-09-01 21:34:59')
    (0) sql: SQL query returned: success
    (0) sql: 1 record(s) updated
    rlm_sql (sql): Released connection (6)
    (0)     [sql] = ok
    rlm_sql (sql): Reserved connection (7)
    (0) sqlippool: EXPAND %{User-Name}
    (0) sqlippool:    --> isptest200
    (0) sqlippool: SQL-User-Name set to 'isptest200'
    (0) sqlippool: EXPAND START TRANSACTION
    (0) sqlippool:    --> START TRANSACTION
    (0) sqlippool: Executing query: START TRANSACTION
    (0) sqlippool: EXPAND UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE pool_key = '%{Calling-Station-Id}'
    (0) sqlippool:    --> UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE pool_key = '80:8B:EB:B2:73:DB'
    (0) sqlippool: Executing query: UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE pool_key = '80:8B:EB:B2:73:DB'
    rlm_sql_mysql: Rows matched: 1  Changed: 1  Warnings: 0
    (0) sqlippool: EXPAND COMMIT
    (0) sqlippool:    --> COMMIT
    (0) sqlippool: Executing query: COMMIT
    (0) sqlippool: EXPAND START TRANSACTION
    (0) sqlippool:    --> START TRANSACTION
    (0) sqlippool: Executing query: START TRANSACTION
    (0) sqlippool: EXPAND SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND expiry_time IS NULL ORDER BY RAND() LIMIT 1 FOR UPDATE
    (0) sqlippool:    --> SELECT framedipaddress FROM radippool WHERE pool_name = 'pool_freeradiustest' AND expiry_time IS NULL ORDER BY RAND() LIMIT 1 FOR UPDATE
    (0) sqlippool: Executing select query: SELECT framedipaddress FROM radippool WHERE pool_name = 'pool_freeradiustest' AND expiry_time IS NULL ORDER BY RAND() LIMIT 1 FOR UPDATE
    (0) sqlippool: Allocated IP 100.64.20.144
    (0) sqlippool: EXPAND UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{Calling-Station-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW()   INTERVAL 1600 SECOND WHERE framedipaddress = '100.64.20.144'
    (0) sqlippool:    --> UPDATE radippool SET nasipaddress = '10.5.5.17', pool_key = '80:8B:EB:B2:73:DB', callingstationid = '80:8B:EB:B2:73:DB', username = 'isptest200', expiry_time = NOW()   INTERVAL 1600 SECOND WHERE framedipaddress = '100.64.20.144'
    (0) sqlippool: Executing query: UPDATE radippool SET nasipaddress = '10.5.5.17', pool_key = '80:8B:EB:B2:73:DB', callingstationid = '80:8B:EB:B2:73:DB', username = 'isptest200', expiry_time = NOW()   INTERVAL 1600 SECOND WHERE framedipaddress = '100.64.20.144'
    rlm_sql_mysql: Rows matched: 1  Changed: 1  Warnings: 0
    (0) sqlippool: EXPAND COMMIT
    (0) sqlippool:    --> COMMIT
    (0) sqlippool: Executing query: COMMIT
    rlm_sql (sql): Released connection (7)
    (0) sqlippool: EXPAND Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})
    (0) sqlippool:    --> Allocated IP: 100.64.20.144 from pool_freeradiustest (did PPPOE-FIBRA cli 80:8B:EB:B2:73:DB port 15743036 user isptest200)
    (0)     [sqlippool] = ok
    (0)     policy remove_reply_message_if_eap {
    (0)       if (&reply:EAP-Message && &reply:Reply-Message) {
    (0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
    (0)       else {
    (0)         [noop] = noop
    (0)       } # else = noop
    (0)     } # policy remove_reply_message_if_eap = noop
    (0)   } # post-auth = ok
    (0) Sent Access-Accept Id 122 from 10.7.7.20:1812 to 10.5.5.17:35276 length 0
    (0)   Mikrotik-Rate-Limit = "500M/500M"
    (0)   Acct-Interim-Interval = 300
    (0)   MS-Primary-DNS-Server = 192.168.16.10
    (0)   MS-Secondary-DNS-Server = 192.168.16.11
    (0)   Framed-IP-Address = 100.64.20.144
    (0) Finished request
    Waking up in 4.9 seconds.
    (0) Cleaning up request packet ID 122 with timestamp  77
    Ready to process requests
  • Related