I made a paper print program to print the paper defined, is a 241 paper, I was last in the paper, after each print a piece of paper, cutting line inside the printer, you also need to hand the paper sending, transportation after the completion of a piece of paper torn off, in the second paper printing, the printer back and there is no automatic paper, every time also need handmade paper in the feed back, slowly, and please give some solutions and advice;

CodePudding user response:

A. 1 mm to 1 mm of custom paper length, and then look at the actual effect,
B. study the printer command, send instructions directly to the port,

CodePudding user response:

Don't quite understand to detailed said

CodePudding user response:

See the printer interface specifications, use the send sends commands to the printer control chart

CodePudding user response:

241-3 and 241-2 and 10 x 11 sheet of paper?
What you said should be a pressure paper, with a copy?
I also used, as long as the paper size setting is no problem, right