We use a set of equipment of TS - 4710 (Technologic Systems)
Equipment is started from the serial port on the main board when I receive the message:
> TS - BOOTROM - built Jul 2013 15:44:26
> Copyright (c) 2012, Technologic Systems,
.
.
Uncompressing Linux... Done, booting the kernel.
INIT: version 2.88 booting
[the info] Using the makefile - style concurrent boot in runlevel s.
[ok] Starting the hotplug events dispatcher: udevd.
[ok] Synthesizing the initial hotplug events... Done.
[ok] Waiting for/dev to be fully populated... Done.
[ok] Activating swap... Done.
[...]. Checking the root file system... FSCK from util - Linux 2.20.1
E2fsck 1.42.5 (29 - Jul - 2012)
/dev/nbd0p2: clean, 40116/196608 files, 252670/786176 blocks
Done.
[ok] Activating LVM and md swap... Done.
[...]. Checking the file systems... FSCK from util - Linux 2.20.1
E2fsck 1.42.5 (29 - Jul - 2012)
/dev/nbd0p3: recovering journal
Superblock needs_recovery flag is clear, but journal from the data.
The Run journal anyway? Yes
FSCK. Corruption: unable to set superblock flags on/dev/nbd0p3
/dev/nbd0p3: * * * * * * * * * * WARNING: Filesystem still has errors * * * * * * * * * *
FSCK died with the exit status of 12
Failed (code).
[...]. The File system check failed. A log is being saved in/var/log/FSCK/checkfs I
[FAILt location is writable. Both Please repair the file system manually.... failed!
[...]. A maintenance shell will now be started. The CONTROL - D will terminate this sh [warnnd resume system boot.... (warning).
Difference root password for maintenance
(or type Control - D to continue) :
That lead to our equipment cannot be started, the specific reason I don't know whether your SD card is broken, damaged or system files,
But if I by serial input Ctrl + D, then the system will run down, but our equipment can not be attached to a serial port (serial port inside the machine),
So turn to the great god, to help give an idea, the failure is due to the card is broken, or other problems, find another LINUX computer I can replicate this SD card, so as to solve the problem?
Looking forward to reply!!!!!
