Turn your bosses, using static IP how to connect to the router

CodePudding user response:

You separate a child of the router can set up the dynamic model (static IP is generally telecom customer network, unless the Intranet wouldn't work, is your company's internal LAN), a router company light cat or connect the main switch, router IP to set up the number 192.168. 1.10 number can be big and provids the IP, or on the net,

CodePudding user response:

Routers share network outside the network configuration,
Network Settings using upstairs said the default 192.168.1. X network segment;
Outside the network Settings adopts automatic access to the network IP method,

CodePudding user response:

Router directly with the wizard mode, dynamic IP is ok, if the company is a fixed IP, you can look from the machines that allow users to surf the Internet IP, run enter ipconfig/all
Then copy in addition to the IP is the IP used after 200, as far as possible Settings

CodePudding user response:

Hello, I am the router WAN port set up automatic access (our company on the Internet are made with fixed IP network segment of 2.0, otherwise can't surf the Internet) automatically access networks outside is 2.49, and then LAN mouth I is to use the default 1.0 network segment and opened the DHCP, but still can't get to the Internet (equipment connected wi-fi can automatically obtain 1.0 segment) I was wondering whether to set to 2.0 network segment to surf the Internet... But the will and the WAN IP address conflict

CodePudding user response:

refer to the second floor nettman response:

router share network outside the network configuration,
Network Settings using upstairs said the default 192.168.1. X network segment;
Outside the network Settings using automatic access to the network IP,

Hello, I am the router WAN port set up automatic access (our company on the Internet are made with fixed IP network segment of 2.0, otherwise can't surf the Internet) automatically access networks outside is 2.49, and then LAN mouth I is to use the default 1.0 network segment and opened the DHCP, but still can't get to the Internet (equipment connected wi-fi can automatically obtain 1.0 segment) I was wondering whether to set to 2.0 network segment to surf the Internet... But the will and the WAN IP address conflict

CodePudding user response:

reference 1st floor weixin_45171376 response:

you separate a child of the router can set up the dynamic model (static IP is generally telecom customer network, unless the Intranet wouldn't work, is your company's internal LAN), a router company light cat or connect the main switch, router IP to set up the number 192.168. 1.10 number can be big and provids the IP, or on the net,

Hello, separation of router is dynamic IP, I express the wrong before the fixed IP refers to our company to do the static routing fixed IP network segment 2.0 to get to the Internet, I now is the WAN port of automatic acquisition is 2.0 but LAN port according to the default of 1.0 after connect the WIFI can automatically obtain the IP is 1.0 segment but still can't get to the Internet,

CodePudding user response:

Is want to try, private behavior, and to what you said the company is using a static IP address on the Internet, refers to the company staff PCS were set on the fixed IP address of Internet cafes, you use a router WAN can automatically obtain the IP address, but in the network have MAC binding, there need to be sure, there were, whether to apply for, the IP with the router's MAC binding, or is not convenient to apply, also can make a sure can set the IP address of the PC online for routing the WAN IP address, the router's MAC address clone into PC's MAC address,,,,,,,
In addition, DNS, DNS, DNS, important thing three times, if you are the kind of home wireless router configuration is common, and linked the router when the DHCP configuration is not issued by the DNS address, your this kind of situation is normal also, have a try in your router configuration of DHCP on the DNS server Settings, if not check DNS address, has been written above the IPCONFIG/ALL are ok

CodePudding user response:

reference 5 floor weixin_41801207 reply:

Quote: refer to the second floor nettman response:

Routers share network outside the network configuration,
Network Settings using upstairs said the default 192.168.1. X network segment;
Outside the network Settings using automatic access to the network IP,

Hello, I am the router WAN port set up automatic access (our company on the Internet are made with fixed IP network segment of 2.0, otherwise can't surf the Internet) automatically access networks outside is 2.49, and then LAN mouth I is to use the default 1.0 network segment and opened the DHCP, but still can't get to the Internet (equipment connected wi-fi can automatically obtain 1.0 segment) I was wondering whether to set to 2.0 network segment to surf the Internet... But will WAN IP address conflict and reducing

This seems to be your company on the Internet with the other management equipment management (such as behavior management limited IP access, technical means such as switches, IP limit access), in this case, cannot access wireless router to access the Internet on their own, need your company's network management to the appropriate permissions to just go!

CodePudding user response:

The bridge, or wan on the Internet

CodePudding user response:

refer to 7th floor wanby response:

is want to try, private behavior, and to what you said the company is using a static IP address on the Internet, refers to the company staff PCS were set on the fixed IP address of Internet cafes, you use a router WAN can automatically obtain the IP address, but in the network have MAC binding, there need to be sure, there were, whether to apply for, the IP with the router's MAC binding, or inconvenient to apply for, also can make a sure can set the IP address of the PC online for routing the WAN IP address, the router's MAC address clone into PC's MAC address,,,,,,,
In addition, DNS, DNS, DNS, important thing three times, if you are the kind of home wireless router configuration is common, and linked the router when the DHCP configuration is not issued by the DNS address, your this kind of situation is normal also, have a try in your router configuration of DHCP on the DNS server Settings, if not check DNS address, has been written above the IPCONFIG/ALL ok

Ok, thank you

CodePudding user response:

refer to the eighth floor nettman response:

Quote: refer to the fifth floor weixin_41801207 reply:

Quote: refer to the second floor nettman response:

Routers share network outside the network configuration,
Network Settings using upstairs said the default 192.168.1. X network segment;
Outside the network Settings using automatic access to the network IP,

Hello, I am the router WAN port set up automatic access (our company on the Internet are made with fixed IP network segment of 2.0, otherwise can't surf the Internet) automatically access networks outside is 2.49, and then LAN mouth I is to use the default 1.0 network segment and opened the DHCP, but still can't get to the Internet (equipment connected wi-fi can automatically obtain 1.0 segment) I was wondering whether to set to 2.0 network segment to surf the Internet... But will WAN IP address conflict and reducing

This seems to be your company on the Internet with the other management equipment management (such as behavior management limited IP access, technical means such as switches, IP limit access), in this case, cannot access wireless router to access the Internet on their own, need your company's network management to the appropriate permissions to just go!

CodePudding user response:

11 references weixin_41801207 response:

Quote: refer to the eighth floor nettman response:

Quote: refer to the fifth floor weixin_41801207 reply:

Quote: refer to the second floor nettman response:

Routers share network outside the network configuration,
Network Settings using upstairs said the default 192.168.1. X network segment;
Outside the network Settings using automatic access to the network IP,

Hello, I am the router WAN port set up automatic access (our company on the Internet are made with fixed IP network segment of 2.0, otherwise can't surf the Internet) automatically access networks outside is 2.49, and then LAN mouth I is to use the default 1.0 network segment and opened the DHCP, but still can't get to the Internet (equipment connected wi-fi can automatically obtain 1.0 segment) I was wondering whether to set to 2.0 network segment to surf the Internet... But will WAN IP address conflict and reducing

This seems to be your company on the Internet with the other management equipment management (such as behavior management limited IP access, technical means such as switches, IP limit access), in this case, cannot access wireless router to access the Internet on their own, need your company's network management to the appropriate permissions to just go!

Network management is more and more strict now, his private routers use