Home > OS >  How to let Wan Zhao card should be under WINDOWS 2008 transfer rate
How to let Wan Zhao card should be under WINDOWS 2008 transfer rate

Time:10-03

Test 1,
: two Windows 7 computer optical fiber directly connected, set up IP, access to Shared folders, copy files,
1 upload, upload 10.5 G of the ISO file to another Windows 7 Shared folder, speed peak moment of 1.25 GB/S, average about 800 MB/S,
2 download, download slightly slow, the peak of 1.25 G, an average of around 700 MB/S,
Above the problem such as optical fiber network card sets jumbo frames are no difference, such as the disabled and open large send partial load effect is not obvious, remote differential compression, there is no difference between open and closed,
Well, the results of the test 1 basic satisfaction, I can accept, but the rest of the test results of 2 is upsetting,
Test 2:
Windows 7 with DELL R730 server2008 directly connected, is also to take share the file copy operation,
Results an egg pain,
Download from the server08 to Windows 7 only around 130 MB/S speed, peak is only 200 M,
Send Windows 7 upload server08 peak is only 300 or so, on average only about 170 MB/S

CodePudding user response:

The actual maximum transmission speed transmission speed depends on the hard disk and not depend on the transmission medium
  • Related