Today in double system ubuntu16.04, had a little problem, now even the original win10 into not to go,,, hope everybody can help me,
My specific installation process is like this:
My computer is lenovo Y7000,
According to some online tutorial, I first got the 300 g space on the hard drive,
After, I use ultraISO put into an empty CD image file u disk,
Then at the Boot interface, press F2 to Boot Mode and the Boot Priority change to the Settings in figure 1 (legacy support, legacy first),
After they entered into the ubuntu installation interface, I got the swap space partition,/boot, reserved for the BIOS partition, the rest to the/, start the boot device is placed in the/boot,
After installed and then into the interface, prompt to restart,
Has been only after restart win10, according to the online method, I try to use easybcd2.3 to add a new entry (when there is a warning of the program, like the efi), but choose Linux interface is gray, can not choose, after reshipment easybcd2.2, found no problem can choose, set up after the restart, after entering boot manager, there are two startup, a Windows an ubuntu, choose ubuntu display as shown in figure 2,
I thought was the type of entry (grub) is wrong, then another type (grub2) creates a new entry, and delete the original (in retrospect is likely to be the Windows to deleted), display is figure 3, the two are not, and even can't get into the Windows,
Also try to use u disk after unloaded the reshipment, ubuntu installation failed, reason as if can't in/boot starter, later I will do,
Now I ask you how to solve the two problems: one is how to restore the normal start of my Windows, 2 it is restored, how to properly install and boot startup dual system,
CodePudding user response:
I hope you can help me, great god,,CodePudding user response:
Done,,, still have to slowly groping,Say your own experience:
First is to restore the Windows boot, there are many tutorials on the net, I have tried, at first I under a win10 disc image, written into the U disk after lost command at the command line, in the way of online but the system always prompts try copying files failed, then I try to do a dish, PE inside and use directly after repair tools, have to restart after unexpectedly,
Fix win10, after I put the original points of several districts are formatted, then in accordance with the method of this blog post on https://blog.csdn.net/s717597589/article/details/79117112/
This time I didn't set to start Legacy, used the UEFI, in accordance with the method of blog all the way down, until the installation is successful, didn't meet what problem, is after the restart when the card is dead, the Internet is and nvidia graphics card, I now also in this,
Anyhow is finally done, it took me all day long time, and I hope my experience can give people in need a little help.