Windows 7 installation after completion of loading, automatic restart cannot automatically restart, cause the failure of the computer system installed,
Guys what reason is this excuse me? Is going to collapse,

CodePudding user response:

With the GHOST of the installation image contain?

CodePudding user response:

GHOST and the original installation are not!

CodePudding user response:

The original installation image also not line? Is filled with a 64 - bit system?
Estimation is the compatibility of the machine you have any question, you can try try to install a 32-bit system

CodePudding user response:

Should not be compatibility issues, reshipment is using the same mirror before, now just install the progress bar after completion of loading, the computer automatically restart crashed directly, and then their own manual boot, boot after will just show black screen with a flashing cursor,

CodePudding user response:

Electronic product features: who told, today also is normal, maybe they hung up on the second day, don't try you give reasons can't help you accurate judgment problem, is one of the lowest cost of reshipment system, there is a name-brand computer lenovo, I this is normal before, but now I have to install a 32-bit system, a 64 - bit installed is couldn't get into the system, also too lazy to rule out a hardware problem

CodePudding user response:

You try on the MSDN under a new system to install and have a look

CodePudding user response:

Is there may be a hardware problem, such as memory chips loose contact, to plug, with rubber dust cleaning

CodePudding user response:

Or, if the MBR and uefi guide selection and Settings

CodePudding user response:

Hard drive mode change, in the BIOS

CodePudding user response:

The partition again? If the partition table there is an error, partition of the start can't find the start is the

Set the disk c