Two computers cable directly connected, in which A computer is configured with A virtual network card, IP is 192.168.1. X, the physical adapter is 192.168.0. X, B computer physical network card IP for 192.168.0. Y, under the same working group, the firewall doesn't open, B computer using this cable and other computer can connect, but AB two computers can't,,, A great god help solve this problem! Genuflect is begged!!!!!

CodePudding user response:

B computer using this cable and other computer can connect, that comply with the same equipment with cross line, heterogeneous devices with straight line

What are you ping? Should be physical network card address

CodePudding user response:

B are connected with the cables and other computer computer can connect

Is connected directly, or through a router?

CodePudding user response:

The cable line sequence is divided into two kinds: 568 a and 568 b,
Standard 568 a line sequence: 1 - green and white, 2 - green, 3 - orange white, 4 - blue, 5 - blue and white, 6 - orange, white 7 - brown, 8 - brown;
Standard 568 b wire sequence: 1 - orange white, 2 - orange, 3 - green and white, 4 - blue, 5 - blue and white, 6 - green, white 7 - brown, 8 - brown;
The ends of the straight line, the same Internet line using the same line sequence;
Cross the line, two of the same Internet line using different line sequence,
That is, both ends of a network cable to use 568 a or 568 b is a straight line; One end on both ends of the cable, with 568 a, 568 b is the intersection line, in practice are generally use 568 b, that is generally considered to be the 568 b to electromagnetic interference shielding is better,
Straight line used to connect computers and the switch (or HUB), routers and switches (or HUB),
Cross the line used to connect computers and computer, the router and routers, cross line is not commonly used,

CodePudding user response:

reference 1st floor Rocloud response:

B computer using this cable and other computer can connect, that comply with the same equipment with cross line, heterogeneous devices with straight line

What are you ping? Should be physical network card address

Ping the physical network card address, 192.168.0. X, but is not

CodePudding user response:

refer to the second floor Rocloud response:

B computer using this cable and other computer even can connect

Is connected directly, or through a router?

Directly connected, not through a router and other equipment,

CodePudding user response:

The

reference 3 floor Rocloud response:

cable line sequence is divided into two kinds: 568 a and 568 b,
Standard 568 a line sequence: 1 - green and white, 2 - green, 3 - orange white, 4 - blue, 5 - blue and white, 6 - orange, white 7 - brown, 8 - brown;
Standard 568 b wire sequence: 1 - orange white, 2 - orange, 3 - green and white, 4 - blue, 5 - blue and white, 6 - green, white 7 - brown, 8 - brown;
The ends of the straight line, the same Internet line using the same line sequence;
Cross the line, two of the same Internet line using different line sequence,
That is, both ends of a network cable to use 568 a or 568 b is a straight line; One end on both ends of the cable, with 568 a, 568 b is the intersection line, in practice are generally use 568 b, that is generally considered to be the 568 b to electromagnetic interference shielding is better,
Straight line used to connect computers and the switch (or HUB), routers and switches (or HUB),
Cross line used to connect computers and computer, the router and routers, crossing the line is not commonly used,

I use the straight line, the connection B computers and laptops, can ping, I check online now nic has auto-reverse function, so they are using a straight line,

CodePudding user response:

refer to 6th floor u012778578 response:

I use the straight line, the connection B and notebook computer, can ping, I check online now nic has auto-reverse function, so they are using a straight line,

Oh, it seems that my knowledge to upgrade

CodePudding user response:

Two machines connected directly, the system should be set up,
Also, the system is the same, is there any account password to log in and so on

CodePudding user response:

Your firewall have shut down
The links below, maybe you can refer to
http://nbbbs.zol.com.cn/40/1191_391312.html

CodePudding user response:

refer to 7th floor Rocloud response:

Quote: refer to the sixth floor u012778578 response:

I use the straight line, the connection B and notebook computer, can ping, I check online now nic has auto-reverse function, so they are using a straight line,

Oh, it seems my knowledge to upgrade

Anyway thanks a lot!

CodePudding user response:

refer to the eighth floor Rocloud response:

two machines connected directly, the system should be set about,
Also, the system is the same, is there any account password,?

Is XP, account password, but it will affect after login connection? Firewalls are closed

CodePudding user response:

Reprint -
Two pieces of card of the computer network Settings:
Local connection 2 second network card (corresponding) of TCP/IP properties, 192.168.0.1, automatically fill in the mask that gateway does not fill, DNS is not fill in
2
A piece of card of the computer network Settings:
Local connection of TCP/IP properties, 192.168.0.2, automatically fill in the mask, gateway, 192.168.0.1 DNS don't fill out
3
The guest account Settings:
A. in the guest account is enabled in the user account control panel;
B. - right - my computer management options - local users and groups - the user - generation red fork in the right column attributes of the project all the options, in addition to the password never expires to hook, in front of all points, not
4
Working group and the host name Settings:
Right click on the "my computer", choose "properties", click on the "computer name" TAB, check the TAB name in your local area network (LAN) working group, such as "WORKGROUP",
5
Then click on the "network ID" button, start "network identity wizard" : click the "next", select "this machine is part of the business network, use it to connect to other work with computer"; Click "next", select "companies use without domain network"; Click "next" button, and then type the name of your network working group, such as "WORKGROUP", click "next" button again, and finally click "finish" button to complete set, after restart the computer, computer in LAN can visits, two computers in the WORKGROUP name must agree, pay attention to the case,
To this look can be ping two computers, had started to configure the Shared folder,
Make sure the working group if I can see your machines in the network neighborhood, if can't see, try the following:
I restart the computer - property - management - service: COMPUTOR BROWSER
If luck is good enough, can share files directly, if not, can refer to below set up further,

CodePudding user response:

The last is how to solve the problem?

CodePudding user response:

The problem of line