Home > OS >  Linux can't two virtual machine
Linux can't two virtual machine

Time:10-17

Good despair, is a clone of another, what firewalls are closed, the map also wrote, two machine is impassability, is net model bridge on the network,,, how to do

CodePudding user response:

谁知道 要哭了

CodePudding user response:

Communication between the virtual machine, the first to ensure that your host and network between the virtual machine is normal, that means you both virtual machine host and ping, with second cloning should pay attention to modify the MAC address to prevent conflict of MAC

CodePudding user response:

Virtual machine ping, a good many possibilities, can look at me "virtual machine even those things don't get to the Internet", this article is primarily concerned with inside I came across one of the most headache, is it IP always jump, and jump out of the unit a network segment, even if has already been set up NM_CONTROLLED="no", not to a NManager control or jump, then this kind of situation is mainly due to the machine on the service of VMWare didn't open, and some simple situation, I have good link, -- -- -- -- -- -- -- -- -- -- and a good ratio on the installation process, make sure not because write letters or missed what wrong, which is caused by the step of trouble,

CodePudding user response:

refer to the second floor yizhixiaocaiji26 response:
exchange between the virtual machine, first to make sure that you host and network between the virtual machine is normal, that means you both virtual machine host and ping to row, second cloning words should pay attention to modify the MAC address to prevent conflict of MAC

Should be the Mac address problems, has been solved thanks

CodePudding user response:

reference qq_38889342 reply: 3/f
virtual machine ping, a good many possibilities, can look at me "virtual machine even those things don't get to the Internet", this article is primarily concerned with inside I came across one of the most headache, is it IP always jump, and jump out of the unit a network segment, even if has already been set up NM_CONTROLLED="no", not to a NManager control or jump, then this kind of situation is mainly due to the machine on the service of VMWare didn't open, there are some simple, I have good link, -- -- -- -- -- -- -- -- -- -- and a good ratio on the installation process, make sure not because write letters or missed what wrong, which is caused by the step of annoyance,

Ok thank you I go and see
  • Related