enter the root account open a terminal, and enter the ifconfig command, check the local IP address
the three address a would want to use, good to see the three IP address later suggested a snapshot backup in order to avoid data loss, and then on to the next step
Enter setup instruction into the configuration system,
choose the fourth option Network up and down of the keyboard, press enter into the next phase of
choose the first option and press enter to continue to the next step
continue to choose the first option and press enter to continue to the next step, enter the IP address configuration
find * position can edit the IP address, press the space here three lines of the input just remember three IP addresses, then the first to the last the IP address of the change they want, such as the back I want to fill in 6, they fill 192.168.248.6 first, and then later the same continue to fill in just two IP address
the last two lines of DNS address need to look at the local
/b local DNS to see
[/b] win10 in the lower right corner, click on the "network and Internet Settings"
find change link attribute
and find a DNS down two rows in the IP address and enter just the network configuration of IP
configured and then kept like this, and then come back here, hold down the TAB select the quit out
This network has been configured, now only need to go back to the terminal input service network restart reset the Internet
wait for circle turn over is already good, at this time whether to enter the ifconfig command to check the IP address change
at this point the last IP address has been changed ok
CodePudding user response:
