Due to build domain environment, I set up a test environment, CISCO 3560 directly by a DHCP server and a test client (Windows 7), found in the testing process, and the rest of the network segment tests were normal, only 4 segment VLAN, server assigned address, but the client shows that did not get to the address of the server allocation, of each segment on the switch and server configuration are the same, for the following:
1, change the static IP address, test no problem;
2, in setting the DHCP server assign IP with a static IP address for the first step to test, is still the service side show allocated, the client according to 169.254. *. *;
3, replace the client side, the other one phenomenon;
4, the VLAN on the switch, the DHCP service 4 operating normally, the client to the address to be normal,
In this case, I want to know what the problem is in the place? What do I have to get on the server VLAN 4 DHCP do?
Thank you for taking the time to answer, thank you.
CodePudding user response:
CISCO 3560 wrote what strategies such as deny Suggestions show run to see nextCodePudding user response:
VLAN configuration of IP Helper in the 4 a horse?