I bought a router according to instructions on the pack, with a period of time, even not on! Afterwards just know is network problem has nothing to do with the router, but my hand to owe the router to factory default, it is! Again said Ann what are not, the default IP address is not correct, and could not get the address 192.168.1.1! The router lights light up but just can't use, ask ace beg ace!

CodePudding user response:

In look at that book, is not necessarily the login address,

CodePudding user response:

Look at what make is your router, find online, corresponding to the brand of the router's default IP address and user name, password,

Take with the line, then a computer network card with the router LAN port connection, your computer IP is set in the same network segment with the router,
With you to find IP router to the default user name and password to login,

CodePudding user response:

Remakes, or incomplete remakes again a few times,

CodePudding user response:

Then IP automatically for how much can look again into the gateway is,

CodePudding user response:

Then IP automatically for how much can look again into the gateway is,

CodePudding user response:

To find a wise men look for you

CodePudding user response:

Sorrow to death me, who knew that it would be so complicated, I don't be a hand owed so this week,

CodePudding user response:

Find the router insertion point, and then have a very small hole, looking for a needle or something, press down don't let go, after more than a dozen in letting off a decade or two seconds, and then will return the default as long as meet the right line, there is no problem in computer access to the original address

CodePudding user response:

Many shanzhai router to modify the router address can't go in to buy a tp link USB wireless network card with the function of QSS a key connection router to the code

CodePudding user response:

Control router specific brand models, and then to check how to operate it online, then there is the network cable plugged into other mouth to try it on

CodePudding user response:

, gateways and routers, of course, is not the same network segment, such as broadband Internet access from your home village, could you allocate IP is also a form such as 192.168.1. The address of X, then you are under the condition of your router is 192.168.1.1 is weak, so, set up the router before, please make sure it is new or has returned to the factory Settings, the router now reset/WPS is mostly the same button, after turning on the power supply, long press not to put, is to reset the restore factory Settings, for the new router, plug directly, do not access lines, computers and mobile phones at this time should be to receive the new number and there is no password, then use the back of a mobile phone or computer to provide user name and password to enter setup interface, the first thing to do is to reset the router's IP address, you need to be changed to other segments, such as 192.168.10.1, can't and your upper level in the same gateway, and then need to restart the router to take effect, this setting, the cable can be bus access router, use the 192.168.10.1 login router, enter the Settings to get to the Internet, the rest is not to say, generally,

CodePudding user response:

Login again after reset, router, generally has two 192.168.1.1 192.168.0.1

CodePudding user response:

Router to the default 192.168.1.1, not to change a power supply plug, is no problem

CodePudding user response:

Router what brand, a comparison shows that online, or contact customer service

CodePudding user response:

Reset the router first time, there is a small round hole in the router, which toothpicks can follow into seven seconds, will see the lights flashing, wait to restart, there are instructions on the back of the router, such as 192.168.1.1 or 192.168.0.1 address, the password is the default, insert the cable into the LAN port, connected to the computer, the IP address is set to the same network segment address, if the description is written in the 192.168.1.1. Then you can manually set the IP address to 192.168.1.100, then enter 192.168.1.1 address on the browser to enter the router background, at the same time to see some router address is http://192.168.1.1, some router background https://192.168.1.1 specific see manual will have detail, really don't understand can contact customer service

CodePudding user response:

Remakes, or incomplete remakes again a few times,

CodePudding user response:

To determine the initial IP router

CodePudding user response:

May be 192.168.1.1 192.168.0.1 or tplogin. Cn

CodePudding user response:

See the manual which is the default address, usually 192.168.1.1 is sometimes 192.168.0.1 or 192.168.1.254

CodePudding user response:

Or do you use cable connected, can see in the network connection on the computer