1, into the STOP mode is only needs to operate a function is ok? Such as:
PWR_EnterSTOPMode (PWR_Regulator_LowPower PWR_STOPEntry_WFI);//into the stop mode
2, check the data and baidu two days, many netizens said, lower power consumption, in stop mode needs to be all the IO port configured to analog input, so I had the IO port state whether there will be change?
After 3, into the stop mode, can do 10 ua levels of power consumption, how to measure the current, the measure? Directly measured with a multimeter circuit board of the above circuit is ok?
4, (key) for a STOP of STM32F103 mode routine!!!!! Thank you very much!!!!!

CodePudding user response:

Hey hey, I have, (image is only part of all the bus IO before sleep, such as used to do the initialization, after be awakened to initialize all) qq: 374125765,

CodePudding user response:

Reference

2, and baidu checked two days data, many netizens said, lower power consumption, in stop mode needs to be all the IO port configured to analog input, so I had the IO port state whether there will be change?

Of course have changed, so come out from the STOP to reconfigure the IO

Reference

3, into the stop mode, you can do 10 ua levels of power consumption, how to measure the current, the measure? Directly measured with a multimeter circuit board of the above circuit is ok?

, of course, when measuring the STM32 VDD or VCC power supply circuit, such as general power supply are stabilivolt, measuring voltage regulator tube output current,

Other don't know

CodePudding user response:

refer to the second floor wangfan027 response:

reference

2, and baidu checked two days data, many netizens said, lower power consumption, in stop mode needs to be all the IO port configured to analog input, so I had the IO port state whether there will be change?

Of course have changed, so come out from the STOP to reconfigure the IO

Quote:

3, into the stop mode, you can do 10 ua levels of power consumption, how to measure the current, the measure? Directly measured with a multimeter circuit board of the above circuit is ok?

, of course, when measuring the STM32 VDD or VCC power supply circuit, such as general power supply are stabilivolt, measuring voltage regulator tube output current,

Don't know other

Ok, thank you!

CodePudding user response:

A STOP mode routine STM32F103 genuflect is begged!