The situation is as follows:
Unit a department due to special circumstances need to connect high-speed Internet, but also to allow access to network resources,
Outer net directly provided by the operator, speed, DHCP IP and MAC address binding through a router, the current Settings for 10.10.5. X section
Network provided by the unit, also can connect to the Internet, but is very slow, it is mainly used for access to a unit interior resource and equipment, with the upper network, there are only through the Intranet web site, also has the equipment such as printers, unit to a fixed IP department, again by the router DHCP department assign IP and MAC address binding, current setting for 10.10.6. X piece,
Two routers are all routers, without any special function,
10 departments within all computers and servers are Windows or Windows Server 2019 operating system,
All computers are equipped with double card, a card connected to the network router, another network adapter connected to the outside network routers,
Because the Windows card priority problem, cannot use two network at the same time, the need to manually set the hop to set the priority, each switch inside and outside the network to set up, it is better to pull switch Ethernet cable is convenient,
This also caused another problem, two LAN 10.10.5. X and 10.10.6. X are included inside the same machine, cannot directly in the sharing of Windows directly by the name of the machine to open the other computer to share files, displays 0 x80070035 couldn't find the network path, must use the IP address to access (arbitrary two network segments), because the machine names is to set a good, easy to remember, IP address because of too much, bad to remember, is to use more troublesome,
Because the machine is more, also more network resources, each machine to write static routing is a bit of trouble,
Provisions are not allowed to use double WAN router (including soft routing), I ask, what is relatively simple and does not require new hardware method, can be relatively easy to access two networks, and the name of the machine can be access to a Shared file,
CodePudding user response:
????????????????????????????????????????