Home > other >  LOTO practice [dry] 4 osc802 infrared sensing unexpected interference
LOTO practice [dry] 4 osc802 infrared sensing unexpected interference

Time:09-19

Last time wrote a project, the main is drop. monitoring function caused by installation of distance change
Waveform amplitude decreases, had to field use voltage comparator done, or the same board this time, but is in
Different debugging 丌 with solving problems on site, the phenomenon of customer feedback in the indoor equipment can be very good implementation is based on
Infrared sensor drop. monitoring, but near the ring-bearer outdoor outdoor equipment will malfunction during the day,





As shown in the above, according to the customer feedback, first verified at left and right in the light of the different environment to do
The flood, E as the infrared emission, R for infrared receiving, use LOTO instruments USB oscilloscope
Line OSC802 迚 waveform check, really about two figure, under different light measured by infrared sensor waveform has great
Different






Above, A (near the ring-bearer outdoor outdoor) on behalf of the sun on the illuminate of infrared receiving sensor,
B on behalf of the launchPlate on the infrared emission of infrared receiving sensor head of irradiation, OSC802 collected waveform display, because A according to
Shoot, the superimposed on the B radiation produced by pulse waveform figure C in dc component,
Below elaborated the basic principle of this question,




D is launch board generated waveform, is our last article introduced and meet expectations, C is unexpected,
Light wave, due to the presence of the C, lead to actual waveform from D to E, destroyed the original system
Judgment conditions,
And, also 丌 can simply change the judgment condition to get around this problem, because C waveform in the light of the 丌 with
Is 丌 with amplitude under the influence of strength, from the dark environment 0 v has been around 4 v to outdoor, can change the light strong
Feeling 冴, enough to drown out launch plate to infrared pulse signal






Solve the sun strong environment there are many methods for infrared emission plate interference, for transmitting load
Wave, in order to distinguish between a sunlight or tube light, ring is in a particular frequency of infrared transmitting tube to exclude the sun
Interference, such as ring-bearer and hood ring-bearer polaroid, here I adopted the practice of quick and easy, using capacitance
Tandem 迚 circuit to remove the dc interference produced sunlight, get to the pulse signal of infrared transmitting tube after
Using output voltage comparator plastic,







Comparator front ends a resistor for isolation condenser C55 to implement the idea, capacitance value is different, the same
The effect of different light environment:






Finally choose C55 0.1 uF capacitance, problem solving,
Also need 丌 broken perfect hardware circuit design, design and laboratory sample stage and mature products of
Have larger distance between, met a lot of field application situation 冴 had never expected beforehand, many senior engineers rely on abundant
Rich experience to avoid detours, around the pit on the road, we experience 丌 enough, can only rely on problems actively
Active move ideas to solve the problem, slowly we will also accumulate the rich experience and purpose and significance of my article
Here is the short text record 丌 enough to bring to read engineer exact and explicit knowledge, but in
To some extent, reveals a little experience, a little ideas of dry goods, the hope can help you,



  • Related