In sudo raspi - open the camera and restart in the config, can detect the camera, but an error occurred when photo instruction (as shown in figure 1),
Error at this time to enter other instructions are no reaction (as shown in figure 2),
If turn off the command window open at this time, about 2 or 3 seconds after the raspberries pie system will directly gets stuck, unable to input command, the mouse move but there is no change, move to the button can't point button (as shown in figure 3),
In this case how to solve...

CodePudding user response:

And one problem is that I input the instructions window "sudo modprobe bcm2835 - v4l2" after this instruction,/dev/video0 relevant content does not appear