Help: how to configure the router-CodePudding

Environment:
Below is the company's network topology, PC (192.168.1.20) can now ping 192.168.0.1 segment, but 192.168.0.1 segment machines cannot ping 192.168.1.1 segment,
Has tried H3C ER3260G2 configured on a router (target address: 192.168.1.0 subnet mask: 255.255.255.0 next hop address: 192.168.0.200)
Control in SecPath ACG1000 application gateway configured (target address: 192.168.1.0 subnet mask: 255.255.255.0 next hop address: 192.168.0.200)

For each master

CodePudding user response:

? Ping the devices in the wireless router

CodePudding user response:

The

reference shahe, 1/f, wu's reply:

? Ping the devices in the wireless router

yes

CodePudding user response:

TPlink router NAT translation by default, so H3C is outside the network segment address 0.0 of course can't ping the PC within 1.0 network segment address,
Can put the TPlink, into the two are connected to a LAN port mouth, so you only use a network segment, of course, if the TP router LAN support division of VLAN, on-demand,
If just for the sake of PING, should be released on the TPlink ICMP options, if still have below TPlink file sharing or server, you need to map or DMZ on TP, etc., there is a cancel if TP NAT function, can pass out said earlier

CodePudding user response:

refer to the second floor Expect - reply:

Quote: reference shahe, 1/f, wu's reply:

? Ping the devices in the wireless router

Yes

Wireless TPlink

refer to the second floor Expect - reply:

Quote: reference shahe, 1/f, wu's reply:

? Ping the devices in the wireless router

Yes

Wireless router is TPLINK?? Then you just need to close the wireless user isolation function,

CodePudding user response:

reference Gu Hao 2 reply: 3/f

TPlink router NAT translation by default, so H3C is outside the network segment address 0.0 of course can't ping the PC within 1.0 network segment address,
Can put the TPlink, into the two are connected to a LAN port mouth, so you only use a network segment, of course, if the TP router LAN support division of VLAN, on-demand,
If just for the sake of PING, should be released on the TPlink ICMP options, if still have below TPlink file sharing or server, you need to map or DMZ on TP, etc., there is a cancel if TP NAT function, can pass out front say

Understand what you mean, thank you