Recently bought a freescale USBDM on a treasure a fully functional version, to realize the product veneer of burning, veneer using MC9S12DG128, according to the directions written in burning software HCS12 Programmer, when veneer using external switch power supply, software can identify to the chip, and burning normal; But when I use when the power is burning device to the board, will prompt wrong, and burn also can not detect and have to plug the USB line, want to burn excuse me why use the write board power supply can not be burned?

Another problem is that to achieve with the command line to burning software to chip burn program operation, this is very important in the veneer test automation, I am
http://usbdm.sourceforge.net/USBDM_V4.12/USBDM_FlashProgrammers/html/index.html
This site has access to some content about USBDM the command line, generally is the index of the command line to you the burning software, followed by some instruction, but the actual operation, I found that can't find I use the software in the folder, also unable to locate an item in the start menu shortcuts to the application, friends would like to ask experienced some directions,

CodePudding user response:

1. Burn burn in the instruction manual of the introduced how to use the board power supply?
2. Right click start bar HCS12 Programmer, find the file location, see which application?

CodePudding user response:

Burn unit of voltage may be insufficient, you can use a multimeter to check

CodePudding user response:

reference 1st floor yishumei response:

1. Burn burn in the instruction manual of the introduced how to use the board power supply?
2. Right click start bar HCS12 Programmer, find the file location, see which application?

Online said is: Target Vdd Control - Enables named "supply" of Target Vdd from the USBDM module
http://usbdm.sourceforge.net/USBDM_V4.12/USBDM_FlashProgrammers/html/index.html
Instructions are in Chinese, about this part of the description is not clear
https://max.book118.com/html/2017/0515/106878330.shtm
Taobao web page through the software is written in the switch
https://item.taobao.com/item.htm? SPM=a230r. 1.14.22.6 d387a53Lpypkw & amp; Id=576762005433 & amp; Ns=1 & amp; 14 # detail abbucket=

HCS12 Programmer to find its position, but not the file,,,

CodePudding user response:

refer to the second floor worldy response:

burn unit of voltage may be insufficient, you can use a multimeter to check

The multimeter quantity only 1 v,,, wonder if bought the fake

CodePudding user response:

reference 4 floor qq_33648990 response:

Quote: refer to the second floor worldy response:

Burn the voltage may be insufficient, you can use the multimeter to check

The multimeter quantity only 1 v,,, wonder if bought fake

Do not use the power of the burning device directly, the board independent power supply, should be ok

CodePudding user response:

reference qq_33648990 reply: 3/f

Quote: refer to 1st floor yishumei response:

1. Burn burn in the instruction manual of the introduced how to use the board power supply?
2. Right click start bar HCS12 Programmer, find the file location, see which application?

Online said is: Target Vdd Control - Enables named "supply" of Target Vdd from the USBDM module
http://usbdm.sourceforge.net/USBDM_V4.12/USBDM_FlashProgrammers/html/index.html
Instructions are in Chinese, about this part of the description is not clear
https://max.book118.com/html/2017/0515/106878330.shtm
Taobao web page through the software is written in the switch
https://item.taobao.com/item.htm? SPM=a230r. 1.14.22.6 d387a53Lpypkw & amp; Id=576762005433 & amp; Ns=1 & amp; 14 # detail abbucket=

HCS12 Programmer to find its position, but not the file,,,

Burn unit power supply is insufficient, can only be an independent power supply,
The original poster with software switch 3.3 V and 5 V, see if there are changes in burn unit power supply voltage,
There is a way to find HCS12 Programmer corresponding application: open the task manager, and then remember the currently running program, then open the HCS12 Programmer, extra program name should be is HCS12 Programmer corresponding application,

CodePudding user response:

reference 5 floor worldy reply:

Quote: refer to 4th floor qq_33648990 response:

Quote: refer to the second floor worldy response:

Burn the voltage may be insufficient, you can use the multimeter to check

The multimeter quantity only 1 v,,, wonder if bought fake

Do not use the power of the burning device directly, the board of independent power supply, should be ok for

Board of independent power supply is written can burn

reference 5 floor worldy reply:

Quote: refer to 4th floor qq_33648990 response:

Quote: refer to the second floor worldy response:

Burn the voltage may be insufficient, you can use the multimeter to check

The multimeter quantity only 1 v,,, wonder if bought fake

Do not use the power of the burning device directly, the board of independent power supply, should be ok for

board independent power supply is written can burn

CodePudding user response:

refer to 6th floor yishumei response:

Quote: refer to the third floor qq_33648990 response:

Quote: refer to 1st floor yishumei response:

1. Burn burn in the instruction manual of the introduced how to use the board power supply?
2. Right click start bar HCS12 Programmer, find the file location, see which application?

Online said is: Target Vdd Control - Enables named "supply" of Target Vdd from the USBDM module
http://usbdm.sourceforge.net/USBDM_V4.12/USBDM_FlashProgrammers/html/index.html
Instructions are in Chinese, about this part of the description is not clear
nullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnullnull