8.2.1 netlist
Network table is also called the network table, just as its name implies, is the network connection and contact said that its content is mainly the type of each component in the circuit diagram, packaging information, connect the serial number data information, such as water use Altium Designer for PCB design, can by importing the network connection relationship between the introduction of the PCB today several mainstream PCB design software support Altium Designer table format net export, which greatly improve the Altium Designer to other classes design software compatibility, as shown in figure 8 to 10,


Figure 8-10 PCB netlist import method - all roads lead to Rome

8.2.2 Protel netlist generation
(1) open the schematic diagram with Protel, in the Design schematic diagram interface menu command "- Create Netlist... ", as shown in figure 8 to 11, select the output "Protel" web tabular, application range and select "Active project", click "OK" button, can be netlist output,

(2) on the output of the network table click the right mouse button, select the "Export... "Command, the path can be set to produce web table lookup, as shown in figure 8 and 12,



Figure 8-11 Protel netlist output


Figure 8-12 netlist export

8.2.3 Altium netlist generation
(1) under the whole project, perform menu commands "design - engineering network table - Protel", as shown in figure 8 and 13, this time will be Generated in the Generated file directory contains a table, for the whole project

(2) click the right mouse button, select the "browse" command, found in the path, can separate calls the table, as shown in figure 8 to 14,


Figure 8 to 13 netlist generation

Figure 8 to 14 net table lookup

(the above content reproduced proposition billion education)