Need to use the tool

Write disc tool
https://www.balena.io/etcher/

Soft routing firmware
Dial links: https://pan.baidu.com/s/1bWG-mJkd7DxwpYOsK3J0fw extraction code: k1mf
Google dish: https://drive.google.com/drive/folders/10LwEkR0AXRHItNFiL18JI4ARksXR6qiv? Usp=sharing

Huawei ct5000 or other thin client (single front-end ports of handheld computers)
I use idle fish $69 huawei ct5000 need to brush the BIOS, you can buy other don't need to brush the BIOS

Tf card usb flash drive or take a card reader
I use the tf card

Start

Disk write
Open the balenaEtcher - & gt; Select the image (browse find good download firmware img format) - & gt; Select the drive (on automatic identification of usb flash drive) - & gt; Flash
Click on the flash wait for a while after finished

Start
Insert usb flash drive above the usb port of the soft routing, good links to display on the mouse and keyboard electric boot, start automatically (need to wait about 5 minutes)

Set the soft routing
This firmware the default firmware IP address is 192.168.186.242, soft routing with wiring, set up computer network card IP in the same period, will not covered here, routing the default IP address in IP address input soft press enter

Set the IP, gateway, DNS, DHCP (don't forget to save and application)
Network - & gt; Interface - & gt; Edit - & gt; IPv4 address

Network - & gt; Interface - & gt; Edit - & gt; DHCP server - & gt; Ignore this interface

Set the node (don't forget to save and application)
Passwall - & gt; The node list - & gt; Using links to add node

Automatic slow switching nodes (his own ideas, please don't speak)

Set the white list mode (his own ideas)

Video tutorial: https://youtu.be/om4EqmnTd-Q