Using the known conditions, programming the

CodePudding user response:

On 0/0 of AR2/0/0/2 0 configured the IP address of the different network segment, and then PC2 and PC3 configuration we segment address, routing interface IP gateway, and set up the router does not need to configure any routing protocol can pass,
With pc1 to communication, it is the AR1 ar2 configured on routing,

CodePudding user response:

To configure a static route IP route on the AR2 -static 192.168.2.1 24 192.168.2.254
IP route -static 192.168.3.1 24 192.168.3.254
IP route -static 192.168.1.1 24 10.1.1.2
To configure a static route IP route on the AR1 -static 192.168.2.1 24 10.1.1.1
IP route -static 192.168.3.1 10.1.1.1 24