MegaZoom12 (MZ12) gun ball linkage fission controller
A, the product overview
MegaZoom12 is a powerful gun ball joint controller, the so-called gun ball joint, is through the wide field of view Angle of the bolt to form the global picture of monitored area, the global picture as a reference to the bolt, by means of linkage control inspects a ball machine, local detail image output, through the gun ball joint, not only to see all see, the purpose of the people in the loop system, can achieve faster and more purposeful manipulation of the high-speed ball; For unattended system, the controller can also be intelligent analysis of the bolt specific target and the behavior situation of the image, the automatic control of high-speed ball track and monitor suspicious target and area, so as to realize the automatic intelligent monitoring,
MegaZoom12 gun ball joint controller, for the bolt and the installation position of the ball mill, there is no special requirements, can be seamlessly integrated into the user's system, are not required to change the existing structure and function of monitor system, can quickly integrate into the user's system,
MegaZoom12 has two working modes:
Linkage: (1) manually by wide-field the bolt pictures for your reference, the user by clicking on the target or box selection, quicklook purposefully control high-speed ball to interested area, this model is especially suitable for people in circuit applications, quick implementation surveillance,
(2) automatic linkage: the wide field of the bolt to intelligent video analysis, automatically detect suspicious target, and then control the high-speed ball to detail the suspicious target monitoring, the application of this model is especially suitable for unattended situation, realize the automatic intelligent monitoring,
Second, typical application solutions
(1) controller and gun ball composed of separate systems:
Controller to collect from the bolt the wide field of video and video ball machine, ball joint implementation gun, can quickly positioning the ball machine to the bolt footage of a particular location, the controller can through the network or serial port for the control of the ball mill,
(2) the embedded controller can be convenient to existing in the system application:
Three, the product features
(1) support two hd SDI video signals (1920 by default? 1080 @ 30 hz, video resolution is adjustable, the adaptive resolution is commonly used as 720 p, 1080 p25hz etc.);
(2) the support line 2 hd video output (1920 by default? 1080 @ 30 hz, video resolution is adjustable, the adaptive resolution is commonly used as 720 p, 1080 p25hz etc.);
(3) two work modes: manual mode and automatic linkage linkage mode, the linkage mode, click on the bolt images of the interested in the position, the ball machine rotation to the position, make the position of the center of the picture, can also be in the bolt picture box to choose an area, the ball mill turning to the area makes the area as the center of the screen, and automatically zoom makes the region shows maximization, which is convenient to see details,
(4) moving target detection, but the Settings area,
(5) to control the ball machine automatic tracking the target, and we can switch between multiple targets, each target tracking duration can be set,
(6) multi-objective test
(7) calibration convenient.
(8) alarm digital output,
Four, appearance figure
(1) bare plate
(2) has a chassis
Five, electrical interface
? Communication and control interface
? Number 1 gigabit Ethernet front-end ports; RJ45
? 2 way RS232/RS422/RS485 serial port
? Optional interface: 1 road USB2.0, 1 road start interface; A SATA interface
? Power supply: DC12V, 3 a
? Mechanical characteristics of the
? Bare plate mechanical size 180 mm * 100 mm * 22 mm;
? With casing mechanical size: 215 mm * 144 mm * 22 mm;
? Weight: naked plate: 240 g; With casing: approximately 800 g,
? Video interface
? Input: no.5 hd SDI, including all the optional support PAL analog signal
? HDMI output: 1 road SDI, 1 road
Six, environmental adaptability
? Working temperature: 0 ~ 75 degrees, extended temperature: support - 45 degrees to 70 degrees, the storage temperature: 55 ~ 80 degrees;
? Humidity: 95%, maximum frost free;
? Vibration: sine: 10 g (15-2000 hz); Random: g2/0.04 Hz (15-2000 Hz);
? Impact: & gt; 30 g, 11 ms, sawtooth wave,
Seven,
(1) with casing
The front panel
Rear panel
? The front panel:
Consisted of thin film button, indicator light operation, failure indicator, "on", "down", "left", "right" "menu", "sure", "cancel" button,
Note: product temporary unused film button,
? Rear panel (from left to right in turn introduce)
? The power switch (lock) : pull to the top, bottom is close,
? Dc 12 v power supply interface (DC_12V) : (+/- 5%), 3 a power supply,
? Terminals (INTERFACE) : mainly consists of two serial port signals:
? Serial port 1: support pixel deviation output, direct turntable control command output (at this stage is PELCO - D), the platform of PID control algorithm result output;
? Serial port 2: used to receive the command control of main control equipment, as well as to the main control equipment AVT22 state information feedback, etc.;
Terminals used 2 x10 3.5 mm spacing cascade terminals, which are defined as follows:
Pin number signals of definition pin number signals of defining note
1 to GND 2 GND
3 RS422TX1 + serial data signal 1 + 4 RS422TX1 - serial data signal - 1 for the output tracking deviation or turntable control commands, such as pelco protocol
5 RS422RX1 + serial data received signal + 1 6 RS422RX1 - serial data signals - 1
7 RS422TX2 + serial data signal 2 + 8 RS422TX2 - serial data signal 2 - and configuration software or the user master equipment communication
9 + 10 RS422RX2 RS422RX2 + serial port 2 data received signal - a serial port 2 data signals -
Are reserved to the 11 12
Are reserved to the 13 14
Are reserved to the 15 16
Are reserved to the 17 18
Are reserved to the 19 20
All indicate the signal of the "reserved", must not have any connection
? USB interface (USB2 and USB3) : with A standard USB TYPE A socket
? The.net interface (NET) : 1 100 m/1000 m network interfaces, with a standard RJ45 gigabit Ethernet socket, can be used to:
? Support pixel deviation output, direct turntable control command output (at this stage is PELCO - D), the platform of PID control algorithm result output;
? The reception of the main control equipment command control,
? To the main control equipment status information feedback AVT22
? Video input/output
? Video input (5) : the socket model is SMA - KWHD, 5 sdi video input or 4 road sdi PAL video input + 1 road input
? Output interface: support two-way hd video output (1 HDMI, 1 road SDI)
? HDMI video output (HDMI_OUT) : A standard HDMI TYPE A socket: after the digital processing of video output, optional overlay: characters, tracking box, such as the bull 's-eye, video resolution up to 1920 * 1080 p @ 60 hz: the factory default output resolution is 1920 * 1080 p @ 60 hz;
? SDI video output: socket model is SMA - KWHD, follow the HDMI output choose video channel for display, video resolution: 1920 * 1080 p @ 30 hz)
Signal are defined as follows:
The name of the signal definition
SDI SDI_IN_ I1 input channel 1, video signal
SDI SDI_IN_ I2 input channel 2, the video signal
SDI SDI_IN_ I3 input channel 3, video signal
SDI_IN_ I4 input channel 4, SDI video signal
SDI_IN_I5/CVBS_IN input channel 5, SDI/CVBS video signal (the default for CVBS signal, if you need SDI input, in order with the manufacturer instructions)
SDI SDI_OUT output channel, video signal (temporary not open)
(2) the bare plate interface (not introduce the interface reference casing interface)
? SATA interface:
Using standard SATA interface socket
? Thin-film button interface
Using soft connection is connected with the board, at the end of the DIP - 12 needles, which are defined as follows:
Pin number signals of definition
1 KEY_UP buttons - "on"
2 KEY_DOWN buttons - "under"
3 KEY_LEFT buttons - "left"
4 KEY_RIGHT buttons - "right"
5 KEY_MENU buttons - "menu"
6 KEY_OK buttons - "confirmed"
7 KEY_CANCLE buttons - "cancel"
8 GND to
9 leds - RUN RUN indicator light
10 GND to
11 leds - FAULT FAULT indicator light
12 GND to
