Why private network IP address is set to 10, 172.16. 7.0.x.x, 192.168 X.X.X, 7.0.x.x, why don't you set it to 11. X.X.X or 191.169 7.0.x.x or something? What is the pay attention to?
Decimal binary
10, 0000, 1010
16? 0001 0000?
31? 0001, 1111,
?
168 1010 1000?
172? 1010 1100?
192 1100 0000
From the point of a binary, also there is no rule,
Could it be set protocol, check all?

CodePudding user response:

Rules to remember bai, which come so much why

CodePudding user response:

Is this is the first international organization, which means that the Internet router wouldn't match these segment IP routing, because it was prescribed for private IP, because private IP is not configured on a router to its routing, because to configure to its network segment routing, so it is private,

CodePudding user response:

This is the law! Is such a few cannot be changed

CodePudding user response:

Can set yourself, you also can be set to 192.1.1.1,

CodePudding user response:

Have these yourself remember to define, but generally 10. X.X.X, 192.168 7.0.x.x network segment is generally manufacturers, such as being easy to remember,

CodePudding user response:

This you will have to go and ask the IEEE, everybody together to discuss, otherwise all messed up, blind to lose address,

CodePudding user response:

Suggest you take a look at https://www.rfc-editor.org/rfc/rfc1918

CodePudding user response:

To know the reason why these protocols definition to a better understanding of these agreements, not only learning, I do not know why, rote learning, can't really grasp of these things,

According to the information I find, it is said that class A address was assigned to about the same, no rest, and 10 section is an organization or someone let out, and 192 of 172 as B, class C IP address, so were chosen at random, without any special meaning,

Don't know, and there was no other statement?

CodePudding user response:

To understand the ABCD four types of IP addresses