Three switches, better hope steps are given, the reasons why

CodePudding user response:

Attached action links http://www.h3c.com/cn/Service/Document_Software/Document_Center/Switches/Catalog/S12500/S12500X-AF/Command/Command_Manual/ComwareV7_Command/#_Toc508809440

CodePudding user response:

Attached action links: http://www.h3c.com/cn/Service/Document_Software/Document_Center/Switches/Catalog/S12500/S12500X-AF/Command/Command_Manual/ComwareV7_Command/#_Toc508809440

CodePudding user response:

You should is to configure the interface based on DHCP, three kinds of DHCP mode, you choose a can

CodePudding user response:

5120 the DHCP Server as if do not have this function only DHCP and testing

CodePudding user response:

Cannot log in web mode, don't have to teach, simple

CodePudding user response:

In fact, you are a 5120 H3C both switch both words, most of them is a layer 2 device, why not just set the DHCP firewall? And, you really be sure this is H3C 5120 si? There are no played the display under the first version for sure,

CodePudding user response:

Because if you are well with vlan beat IP address, and the direct route will lead to well with both vlan subnet configures each other, because of the switch will take different vlan created already, so only layer 2 IP address is used,

CodePudding user response:

With buried 186.186.254.1 public address, big made from this IP subnet configures the network address first, normal system:
Special IPv4 address is as follows:
IP rating IP position
Class A 10.0.0.0 - those
The default subnet mask: 255.0.0.0
Class B along - 172.31.255.255
The default subnet mask: 255.224.0.0
Class C 192.168.0.0-192.168.255.255
The default subnet mask: 255.255.0.0