1, local area network (LAN) in 360 will be prompted to arp and IP conflict attack, attack to find MAC is not the culprit, close the MAC devices, attacks continue, track the new MAC; Repeat shut down, MAC has been changed,
2, known to change the IP address, any device on the network will cause attack; May be powered on, can also cause attacks,
The presence of 3, 254 gateway, attack occurs; Replace the gateway 254 still attack,
4, through the way of LAN separation, you can find the attack computers; Redo system, format the hard disk, replace the computer, only treats the symptoms and solution not effect a permanent cure,
O solution

CodePudding user response:

Uninstall 360, will not be suggesting the ARP attack

CodePudding user response:

Baidu should be able to find some free ARP attack prevention tools, that can hold one

CodePudding user response:

Are there any prevent private pick up agent in the routing sharing these functions

CodePudding user response:

Close 360, use of ARP tech-oriented protective shield, literally a machine can protect a network segment

CodePudding user response:

If small network can make binding on the layer 2 switch, if the size is on the second floor do port isolation

CodePudding user response:

If the Internet equipment, can be manually binding IP and MAC, and static configuration on the client IP address

CodePudding user response:

Use under the subcontract software can scan and see who is sending arp attack, it is ok to find,

CodePudding user response:

Cut the binding IP and MAC address, top can be binding on the routing, bottom fixed IP Settings on the computer;

CodePudding user response:

Routing two-way binding MAC and PC through a solution

CodePudding user response:

Try the arp static binding IP address

CodePudding user response:

Arp -s static binding gateway IP address and MAC address