1. Copy the corresponding package to ubuntu, and extract the,
2. Format the tf card for the fat32 format, and then in the ubuntu system insert tf card, use the command "df - l" can view the tf card device node and hung on the directory, as shown in the figure below,
3. The author here tf card nodes is/dev/sdb1, mounted in the directory "/media/C03F - 4578" (it is possible that the SDC, SDD, according to the actual situation, also is different directory), and then we use umount command to cancel the mount umount/media/C03F - 4578 ", "
4. The use of "ls/sbin/MKFS *", the author machine as shown in the figure below,
As shown in the above, if the user's machine are not in the file "/sbin/MKFS. Fat", use the command "ln -s/sbin/MKFS. Vfat/sbin/MKFS. Fat", so, just skip this step,
5. Use the CD command into the front unzipped tf_flash folder
Then, in the current directory to run "./mksdcard - android. Sh - f/dev/SDB "(note that SDB back don't number), as shown in the figure below,
Run to complete as shown in the figure below,
Unplug the tf card, and then reinsert the ubuntu system, type the command "df - l", you can see the tf card partition information, as well as the mount directory, as shown in the figure below,
Above "/dev/sdb5" is a file system partition (likely users drive will be sdc5 etc., please remember to bring a number 5 drive is to save the file system), we see mount directory is ab9a7cd "/media/1-9 ccebac536 CFB - 4880-9523-231", we use the unpack command, decompression tf_flash files in the directory to
Ab9a7cd "/media/1-9-4880-9523-231 ccebac536" CFB, decompression, after the completion of tf card burning start card is completed,
6. The following written copy need to burn the android/qt/ubuntu mirror to tf card, first use "df - l" command, check the tf card of partitions, and mount the directory, as shown in the figure below,
"/dev/sdb4" (likely users drive will be sdc4 etc., please remember to drive with a number four is a system to save the article) directory is stored image partition, mounted directory is "/media/017 c - 7 a71", we write need to burn the image to use cp copy command, copy to this folder, the following can be the tf card to check the iTOP - iMX6 development board on burning,
Development board from the start the tf card, dial the code 1 and 7, to ON, the rest to OFF, then insert tf card, electric development board, a serial port will have started to print, will run the uboot first, and then start the kernel, mount the file system, the automatic into burning mode for burning, burning, after the completion of development board of the buzzer will be as a beeping sound, burn write complete serial print as shown in the figure below,
Last dial the code switch to emmc boot, completes the burning mirror,