I ask bosses, how to configure the router R1 for DHCP relay, let pc1 can obtain from the DHCP server address

CodePudding user response:

https://blog.csdn.net/muxia_jhy/article/details/89502091
This is, I have just finished writing an article about huawei devices configured in the DHCP relay, winServer server configuration section if you don't have to look not to use it, mainly the middle AR1 router configuration, first open DHCP function in AR1 global mode, and then on the gateway directly connected to the PC interface open DHCP relay,
#
DHCP enable
#
Interface GigabitEthernet0/0/0
IP address 192.168.86.3 255.255.255.0
#
Interface GigabitEthernet0/0/1
IP address 192.168.100.1 255.255.255.0
DHCP select relay line # 9, 10 is the interface view under the DHCP relay configuration commands
The DHCP relay server - IP 192.168.86.2
#