Home network environment, the current export two broadband telecommunications 200 m optical fiber and mobile 50 m optical fiber, telecom still does not support IPv6, but can move, but the bandwidth of the telecom is high, is the main home each device on the Internet,
Two weeks ago to buy huawei AR101W -s access router, to achieve: all equipment used in the home network access ipv4 service telecom 200 m exports (because the ISP does not support IPv6), access to mobile IPv6 go 50 m exports,
Nas currently set v4 and then do port mapping in routing, network address can have normal access networks outside, nas to get ipv6 public network address at the same time, and then with the help of ipv6 environment directly with public address access networks outside,
Desktop want to study at the same time with the IPv4 and IPv6 address address, access the v4 service telecom the exit speed, moving the exit when accessing a v6 site,
Own me for a week, check a lot of information, the web and command interface to anyway not fix, all quick collapse, currently set two mouth into three layers, one by one by telecom mobile, telecommunications access to IPv4 address; The mouth of the mobile I establish single ipv6 pppoe dial, also get to v6 address, just don't know how to set up home all can obtain the ipv6 address of the equipment at the same time automatically according to the v6 address prefix,
I brush with their own Pandora's old network routing tried, mobile optical fiber can access to the v6 address and prefix, length and DNS, and built-in Pandora is good, showing the PD model, so the terminal connected to automatically obtain v6 address, visual inspection is the original address, is always to huawei router Settings,
Troublesome everybody a great god help me, I can such implementation, how to do? Thank you,
CodePudding user response:
Policy routing, the original address is designated the next-hop v6 good