Home > other >  About using GNS3 complete communication between the vlans
About using GNS3 complete communication between the vlans

Time:09-28

There is a cisco router R1
With a router analog switches sw1
Using 3 router simulation PC pc1 pc2 pc3
R1 connect sw1 sw1 connect three PC (required: complete 5 devices to communicate with each other between)
R1 IP: 192.168.1.3
A subinterface 10:19 2.168.10.254
A subinterface thou 2.168.20.254
A subinterface 30:192.168.30.254
The management of sw1 vlan1 192.168.1.2 instead
Vlan10 assigned to pc1
Pc1 IP: default gateway 192.168.10.1 192.168.10.254
Vlan20 assigned to pc2
Pc2 IP: 192.168.20.1 default gateway 192.168.20.254
Vlan30 assigned to pc3
Pc2 IP: 192.168.30.1 default gateway 192.168.30.254
Experimental results in addition to sw1, other devices can ping each other between, I don't know whether the IP and planning of the default gateway has a problem
Hope leaders can give answers

CodePudding user response:

Sw1 to set as the default gateway 192.168.1.3

CodePudding user response:

SW 1 to write an article on the static routing IP default gateway - 192.168.1.3
  • Related