subject as follows, have who can write a detailed process, I all configured, stuck in a DHCP relay there, I do not know how to issued two different IP network segment, to configure the VLAN on the switch will also be two mouth joined the two different VLAN, now want a detailed tutorial, thank you for your bosses

CodePudding user response:

When you configure the DHCP server, add network segment to DHCP - in the pool, as well as a single operation

CodePudding user response:

reference 1st floor baidu_37514718 response:

when you configure the DHCP server, respectively, add network segment to DHCP - in the pool, as well as a single operation

this is not very understand, configure the DHCP is not stipulated the network segment address?

CodePudding user response:

Router interface, open as a gateway

CodePudding user response:

R2 subinterface is open;
R2 IP help point the address is correct;
Not really caught, see steps from which no package

CodePudding user response:

R1 (config) # int f0/0
R1 (config - if) # IP add 10.2.19.253 255.255.255.252
R1 (config - if) # no shut
R1 (config) # router rip
R1 (config - the router) # version 2
R1 (config - the router) # no auto - the summary
R1 (config - the router) #.net 10.2.19.252
R1 (config) # service DHCP
R1 (config) # no DHCP IP conflict logging
R1 (config) # IP DHCP pool ccie//define the first address pool
R1 (DHCP - config) # network 10.2.10.0 255.255.255.0
R1 (DHCP - config) # default - the router 10.2.19.253
R1 (DHCP - config) # domain - name cisco.com
R1 (DHCP - config) # netbios name - server 10.2.19.254
R1 (DHCP - config) # DNS - server 202.96.128.166
R1 (DHCP - config) # lease infinite
R1 (config) # IP DHCP pool CCNP//define the second address pool
R1 (DHCP - config) # network 10.2.20.0 255.255.255.0
R1 (DHCP - config) # domain - name cisco.net
R1 (DHCP - config) # default - the router 10.2.19.253
R1 (DHCP - config) # netbios name - server 10.2.19.254
R1 (DHCP - config) # DNS - server 202.96.128.86
R1 (DHCP - config) # lease infinite


R2 (config) # int f0/0
R2 (config - if) # IP add 10.2.19.254 255.255.255.252
R2 (config - if) # IP helper - address 10.2.19.253//configuration help address
R2 (config - if) # no shut
R2 (config) # router rip
R2 (config - the router) # version 2
R2 (config - the router) # no auto - the summary
R2 (config - the router) # network 10.2.19.252
R2 (config - the router) # network 10.2.10.0
R2 (config - the router) # network 10.2.20.0

I hope it can help you

CodePudding user response:

IP help relay address - the address configuration, and ensure the relay can reach, is solved,