As title, turn to the great god! Ping to the same network segment is ping through parts of the machine, what reason be?

CodePudding user response:

Other equipment of the firewall has not closed?

CodePudding user response:

Ping the prevention

CodePudding user response:

Through the firewall of this computer, or antivirus software ban ping

CodePudding user response:

Are you gateway didn't set?

CodePudding user response:

The same network segment ping because all in the same local area net, so don't set a gateway also line,

You look at the right of the gateway Settings

CodePudding user response:

Ipconfig -all cut a figure to send up to look at it

CodePudding user response:

Generally to the gateway, the gateway is not set, or equipment with IP + MAC binding set access

CodePudding user response:

May also be the loop, or has the ARP virus attack,

CodePudding user response:

Can you PING the part of the machine also can gateway?

CodePudding user response:

The firewall, can, in turn, ping

CodePudding user response:

Can connect to the Internet to prove the gateway is normal, just ban ping firewall

CodePudding user response:

Can connect to the Internet to prove the gateway is normal, just ban ping firewall

CodePudding user response:

Can't computer opened the firewall

CodePudding user response:

The majority is forbidden ping

CodePudding user response:

Possible part into the loop, or the arp deception

CodePudding user response:

Can connect to the Internet gateway configuration no problem, can't the gateway may be cut with the acl vlan, and that the segment in the acl did not pass this net segment address (part of the manufacturers of equipment, need to pass their own network segment address, otherwise can't gateway), this section of part of the terminal ping impassability, may be part of the terminal firewall is not closed, you can, in turn, ping once a try,

CodePudding user response:

With the scope of network segment? Across several exchange? Find the device recently program-controlled exchange interface look at acl and firewall Settings

CodePudding user response:

This problem is too low,

CodePudding user response:

You need to check the firewall, mask mask length, network input is correct (IPconfig/all), whether the DHCP error, in addition the ICMP protocol is disabled, you also can't PING, and the machine card whether work properly!

CodePudding user response:

Check the firewall can't machine? Off to try again