2. Do the case management SHMC with normal BMC in development have to differ?
CodePudding user response:
Reading data from the machine cycle, I2c host at the end of the command is to read command, or must't get data from the machineCodePudding user response:
SHMC is when to send the request to the host, after sending the request immediately after the switch to the I2C send the response from machine model wait IPMC, accordingly, IPMC free cases I2C from machine model, after the IPMC receives the request from SHMC, to switch to the I2C host, to SHMC write response, after writing the response, IPMC again to switch back to the I2C from machine state,The host in the communication protocol I2C address (rqAddr) is used to write to the SHMC IPMC response to use,
CodePudding user response:
What are you doing and also recently in BMC, can leave a contact numberCodePudding user response:
Can I leave a WeChat, BMC research study togetherCodePudding user response:
Is the I2C controller generally have four patterns: Lord, Lord closed; From the hair, from the closedIs the role of the primary and secondary depending on which side of the clock the clock line is to be;
So the Lord accept the meaning of active reading is the main equipment cache the value of the
And from a signaling is the beginning of each main equipment launched mass, then from the device to write data in the cache, waiting for the master signal transmission to complete it again refresh cached data
CodePudding user response:
I2C controller generally have four patterns: master, the Lord closed; From the hair, from the closedSo send out the request switch into slave mode can be waiting to receive immediately, this is no problem,
CodePudding user response: