(urgent) have a network connection problem, and solve actual scenario requires-CodePudding

Problem as shown in figure, is there any simple method, make the host 1 can access to the web camera?

CodePudding user response:

Add a routing!!!!!!

CodePudding user response:

reference 1/f, burnout response:

add a routing!!!!!!

Could you tell me how to add the????????

CodePudding user response:

Note, 2 switches is together, and whether it is ok to add a router, do route forward, how to set up

CodePudding user response:

Note: the two switches are ordinary switches, if add the router, need what kind of router, normal routers can

CodePudding user response:

Whether a specific description of your hardware environment, the physical location

CodePudding user response:

This depends on the specific environment, install your current description about the ordinary router should can, as long as you can set the static routing

CodePudding user response:

1. You can put a router2. Add a piece of card to the computer, just brace thread, very convenient,

CodePudding user response:

Switch S1 and switch between S2 and even a network cable, to configure an IP on the host 1 nic: 172.92.101. YYY, mask 255.255.255.0, so you can
But need to confirm whether the two switch configuration VLAN, if there is a VLAN according to switch configuration is needed to solve

CodePudding user response:

Two switch if you can direct the net line connection, and then configured on the host 1 and then match a webcam with the same network segment of the IP address and mask should be ok,