Using a cisco simulator configuration asa firewall configuration NAT, don't know what the reason, I put all the internal network is converted to a public network address, interior is divided into a vlan, but only one vlan can ping the external network, what reason is this excuse me? Firewall show the run command is as follows:
The object network inside1
Subnet configures 192.168.177.0 255.255.255.0
The object network inside2
Subnet configures 192.168.178.0 255.255.255.0
The object network interface
The host 113.102.198.112

Access - the list 102 extended permit icmp any any

Access - group, 102 in interface outside
The object network inside1
NAT (inside and outside) the dynamic interface
The object network inside2
NAT (inside and outside) the dynamic interface

CodePudding user response:

When I put the project are preserved, reopen the cisco packet software, should have been able to pass the vlan also not now, then I have no command, enter again, the vlan pass again, but only this one vlan can pass, what reason is this excuse me

CodePudding user response:

Routing needs to be set