By respective routing is configured with three gateway:
10.8.144.1,
10.8.144.2,
10.8.144.3
Terminal by modifying the network gateway to change operators,
Now there is a firewall (IP: 10.8.144.250) below answered a server, the server IP: 172.168.10.254,
By assigning a VLAN gateway firewall: 172.168.10.1 to server
connected to the networkNow only a 144.2 gateway can access the server, the remaining two gateway can access,
How can you make three gateway can access the server at the same time?
[article 3 cables must be manually switch, can't do a, because if the equipment is broken, can also be manually switch the other 2 nets, do a device inside a bad network paralyzed]
Hope you a great god glad
This is the entire network topology
CodePudding user response:
Will be released the server to the network, each network publishing an IP (your solutions are three unicom telecom mobile IP), then internal processing generally two processing methods: policy routing, from a line of three wire (judge over IP), change the next jump, return flow from the corresponding export; There is a solution is multiple IP, network and multiple network segments, different networks in different segments within the map server, and then according to the different network IP, take different routing,CodePudding user response:
Move the server's firewall to the main exchange, let three can access to the Internet,CodePudding user response:
B, c, d from three building A building is to distance?CodePudding user response:
SAO years you the server connection is right you should connect server directly on the main switch and then on the core switch port is good generally only where such connection meaning ah your firewall to connect the PC switch equipment is not straightCodePudding user response:
Three gateway can visits?4th floor, and the big brother, live in the textbook?
LZ this proposal on the firewall directly to the main switch, the server still connecting to the firewall