Download the program always prompt "Could not stop the Cortex - M device! Do check the JTAG cable ", after the determine another message "Error: Flash Download failed - Target DLL has had been cancelled" and JLINK still keeps flashing red light, don't know why,
JLink info:
-- -- -- -- -- -- -- -- -- -- -- --
DLL: V4.62, compiled as Jan 25 2013 15:19:47
The Firmware: J - the Link ARM V8 compiled 17 Jul 2014 12:31:18
The Hardware: V8.00
S/N: 304427288
Feature (s) : RDI, FlashDL FlashBP, JFlash, GDBFULL

* JLink Info: TotalIRLen=9, IRPrint=0 x0011
* JLink Info: TotalIRLen=9, IRPrint=0 x0011
* JLink Info: Found architecture (M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and literal 2 slots
ROMTableAddr=0 xe00ff003
* JLink Info: Found architecture (M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and literal 2 slots
* * JLink Warning: S_RESET_ST not cleared
* * JLink Warning: CPU did not halt after reset.
* JLink Info: Found architecture (M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and literal 2 slots
* * JLink Warning: CPU could not be halted
* JLink Info: Core did not halt after reset, trying to disable WDT.
* * JLink Warning: CPU did not halt after reset.
* JLink Info: Found architecture (M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and literal 2 slots
* * JLink Warning: CPU could not be halted
* * JLink Warning: CPU did not halt after reset.
* JLink Info: Found architecture (M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and literal 2 slots
* * JLink Warning: CPU could not be halted
* * JLink Warning: S_RESET_ST not cleared
* * JLink Warning: CPU could not be halted
Tried a lot of method, can't, please have a look through passing by the great god help!

CodePudding user response:

Check whether the jlink connected and mdk5 magic wand - whether in the debug chose jlink, check whether the flash flashdownload in Settings

CodePudding user response:

These are set up, there is no problem of

CodePudding user response:

In Option 1 level program optimization of c/c + +, check the "Optimize for time", and check the "One ELF Section per Function". Not check the Option of ASM "Thumb Mode), solve, that is when a problem is set up in jlink c/c + + and ASM.

CodePudding user response:

reference AMAZING_A1 reply: 3/f

for the Option of grade 1 program optimization of c/c + +, check the "Optimize for time", and check the "One ELF Section per Function". Check the Option of ASM "Thumb Mode), solve, that is such a problem is set up in jlink it when c/c + + and ASM.

In Option 1 level program optimization of c/c + +, check the "Optimize for time", check the "One ELF Section per Function". Check again no rtex O - M3 contains the Thumb instruction set?) , solve, that is a problem with the c is placed in jlink/c + + and asm.

CodePudding user response:

reference AMAZING_A1 reply: 3/f

for the Option of grade 1 program optimization of c/c + +, check the "Optimize for time", and check the "One ELF Section per Function". Check the Option of ASM "Thumb Mode), solve, that is such a problem is set up in jlink it when c/c + + and ASM.

I took the CSDN type work, write properly can deliver the order in chaos

CodePudding user response:

Open the JFlash burn HEX file directly

CodePudding user response:

refer to 6th floor bsnow response:

open directly JFlash HEX file

Friend hello, still use MDK burning? Detailed steps could say, I just contact the knowledge

CodePudding user response:

Or texture is clear, setting, and burning