To check a lot of information, such as teardown approach, where to put the hard disk, buy much,
According to the actual demand, I bought Kingston 256 gb solid state drive, 200 + RMB, and then I bought a bracket, is to replace the drive a shelf, put the SSD, bought a 12.7 mm but I don't know the size of the shelf, later found it's too big, should buy 9.5 mm, but I don't want to change again, impatient unbearable to mount SSD, is going to put the tray in the location of the original 500 g of mechanical drive, should also think about 256 g will be enough, here will talk about my whole teardown process
1. This type of laptop back cover unscrewed the three screws, first turn off the computer, battery, unscrewed the three screws and then like to open some remote control back cover push down first, and then open, is this appearance,
2. And then blue this is mechanical drive, put it down to just change solid-state drives, (yellow circle on the drawing, by the way, there is a screw, after it is turned on to drive out,) and then cover the back cover equipped with batteries,
It is in the process of solid state, and the most difficult is not this step, but loading system, while loading before, but this time put system still took me a long time, here to talk about my outfit system process,
Because I was loading system, so have u disk boot disk, there are many online software, will be more than a 4 g usb line, but need to format, such as Chinese cabbage, such as Korea, Dr, this step requires before install SSD, unless you have other computer to create,
After packed solid state drives, need to reinstall the system, and put the system into solid-state drives, computer will be faster, because I am a change of the mechanical drive, so only solid-state drives, don't think too much,
The u disk boot disk into the computer, boot, and then press the BIOS command on the start page into a window that is commonly F12, my computer is F2. I didn't take pictures, similar to a blue screen window, all is in English, you need to set up usb startup, baidu, and then restart your computer, then automatically into the u disk boot, may want to select the version of Windows,
Next is the key of the need, partitions, open the partition assistant, oneself to each dish points such as size, and then select the topic system disk, be don't put the system disk in the mechanical hard disk mechanical hard disk, and then select the 4 k alignment, (must choose this, otherwise the effect of solid-state drives reach) or 4096 alignment, generally is the default choice,
After the partition is reshipment system installation, operation according to the different reshipment system software have slightly different installation process, and then wait for the installation is complete can restart, but according to remove the usb stick, immediately after the restart generally will automatically load the boot,
Make me feel sick, I have been boot failure, installed after the restart display checking media, then the blue one, make of I quick collapse, see in the BIOS window solid-state drives have been identified to also say not hard disk problem,
Baidu and solid-state drives customer service asked finally solved the problem, in the BIOS command window to secure boot control set to disabled, then restart up,
Behind also met a problem, I'm doing system should become inactive, I remember the last time is also made of the iso image file no problem, can't again go to taobao spent 11 RMB to activate my Windows,
To this, finally my computer boot successfully and can be used, the speed is really to force oh, don't have to change computer,
