This link is the actual network of internal circuit, PC2 can access a network segment PC1 segment, but, in turn, will not be able to access, I made a static routing on AR2 routing, the pictures are screenshots, feeling should be true, but still, in turn, can't access, please everyone a great god help me,










Online said has examined the static routing configuration on all routers all straight networking, later I again on the AR3 do a static routing, results indicate as follows:

CodePudding user response:

Should be to 11.0 segment on R2 routing, gateway is 123.12

CodePudding user response:

And routing it doesn't matter, here are TPLINK, is NAT network, can only make the mapping

CodePudding user response:

Upstairs, tplink the routing is Jane home with the routing, NAT only way, so see if you can put on the ar3 pc2 mapped to pc1 is located on a network segment

CodePudding user response:

It's no use this router configuration, you configure a gateway he deserve a 0.0.0.0 0.0.0.0 gateway IP such a dynamic routing other routing plus to also useless,