Units, such as the following: now in yunnan,
Now outside the unit net by a huawei router by moving the ISP AR120 - S, on the network Settings VLANIF1:10.10.10.1/24, even under the huawei S5720 switches,
Huawei S5720 configuration VLANIF1000:10.10.10.2/24, even on AR120 -s, already do routing,
S5720 configuration VLANIF1:192.168.7.1/24, do segments within the Internet,
Existing a floor advertising machine assigned static IP: 192.168.7.3/24 on the Internet,
Now because of business needs, this advertising machine needs to receive advertising push from a server in Beijing, need a few port 12440124 and 41, Beijing needs to our Internet interface under AR120 - S do port mapping, starting to do a separate mapping each other informed the connection fails, now the global mapping is still failed, I send in the following configuration, a great god, please help to look at, told the little brother where do wrong, thank you!
Dis IP int b
* down: administratively down
^ down: standby
(l) : loopback
(s) : spoofing
(E) : E - Trunk down
The number of interface that is UP in The Physical is 3
The number of interface that is DOWN in The Physical is 1
The number of interface belong UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1
Interface IP Address/Mask Physical Protocol
Cellular0/0/0 unassigned down down
Ethernet0/0/4 183.224.178.43/25 up up
NULL0 unassigned up up (s)
Vlanif1 10.10.10.1/24 up up
[V200R005C20SPC200]
#
Sysname YN - PE - data - the ROUTER
#
Drop the illegal - MAC alarm
#
Ipv6
#
DNS resolve
The DNS server 211.139.29.150
The DNS server 222.172.200.68
DNS proxy enable
#
Wlan ac - global carrier id other ac id 0
#
DHCP enable
#
Pki realm default
Enrollment self - signed
#
SSL policy default_policy type server
Pki - realm default
#
The acl name Ethernet0/0/4 2999
Rule 5 permit
#
Aaa
The authentication scheme - the default
Authorization - scheme default
Accounting - scheme default
Domain default
Domain default_admin
Local - user admin password irreversible - cipher % @ % @ + 4 zf G0 ~! L) & gt; RY * SCmEVRKOSFW ^ * I "l9e @ ~ L - | v. \! \ (9 osik % @ % @
Local - user admin privilege level 15
Local - user admin service -type HTTP
#
Firewall zone Local
The priority of 16
#
NAT alg FTP enable
#
Interface Vlanif1
IP address 10.10.10.1 255.255.255.0
#
Interface Ethernet0/0/0
#
Interface Ethernet0/0/1
#
Interface Ethernet0/.two survivors
#
Interface Ethernet0/0/3
#
Interface Ethernet0/0/4
TCP adjust - MSS 1460
IP address 183.224.178.43 255.255.255.128
NAT server protocol TCP global 211.103.219.50 any inside 192.168.7.1 any
NAT outbound 2999
#
Interface Cellular0/0/0
#
Interface NULL0
#
The info - center timestamp log format - date
#
SNMP agent local - 800007 db03845b1276349e engineid
#
HTTP secure server SSL - policy default_policy
The HTTP server enable
HTTP secure - server enable
#
IP route -static 0.0.0.0 0.0.0.0 Ethernet0/0/4 183.224.178.1
IP route -static 192.168.7.0 255.255.255.0 10.10.10.2
#
The user - interface con 0
Authentication - mode password
Set authentication password cipher % @ % @ {P V ~ 9 BXH 'ag ~ $2) {u ` \] 0 (n) b + 8 m/Bo/4) dD ~ 9] R - & gt;" ! N) e (% @ % @
The user - interface vty 0
The authentication mode - aaa
The user privilege level 15
Protocol the inbound all
The user - interface vty 1 4
The authentication mode - aaa
Protocol the inbound all
#
Wlan ac
#
Return
CodePudding user response:
Outside of our network is not set up any server, the configuration is made of the front and back revisedThis is the original:
Interface Ethernet0/0/4
TCP adjust - MSS 1460
IP address 183.224.178.43 255.255.255.128
NAT server protocol TCP global 211.103.219.50 any inside 192.168.7.1 any
NAT outbound 2999
After consulting the huawei official
NAT server protocol TCP global 211.103.219.50 any inside 192.168.7.1 any
To
NAT server protocol TCP global 211.103.219.50 inside 192.168.7.1
CodePudding user response:
Outside the port mapping, should not be 7.3 and web address to do?211.103.219.50 and 183.224.178.43 is?