Everyone a great god, question is like this, I'd like to run in the vmware vxworks 6.9, first download the DOS6.22, DOS startup configuration file config is

 
 [menu]Menuitem=Boot_VX, Start with VxWorks69 
Menuitem=Boot_DOS, Start with MsDos622 
Menudefault=Boot_VX, 3 
Menucolor=7, 0 
[Boot_VX] 
Device=c: \ himem sys/testmem: off 
DOS=high, umb 
Shell=c:\vxload.com c: \ bootrom sys 
[Boot_DOS] 
Device=c: \ himem sys/testmem: off 
DOS=high, umb 
[COMMON] 
Files=40 
Buffers=30 
Rem DOS=high, umb 

Pictures can't upload, be sure you click the following link to view the picture
http://m.qpic.cn/psb?/V14FPwgz1uK1b8 pLkVWBYnxjNFx6r * AosecC4k W1Iyge4TcwfJqU2ZfM!/b/dFIBAAAAAAAA& Bo=VgLwAAAAAAARB5Q! & Rf=viewer_4
And then changed the config in pcPentium4. H file, add the following macro definition

 # define INCLUDE_PC_CONSOLE 
# define INCLUDE_DRV_STORAGE_AHCI 
# define INCLUDE_DRV_STORAGE_PIIX 
# define INCLUDE_GEI825XX_VXB_END 
# define DRV_NVRAM_FILE "/ata0:1/nvram. TXT" 
# define NV_RAM_SIZE (0 x1000) 

And then build the BSP engineering workbench, get the bootrom. Sys, copies the file into a vmware under DOS in the disk c, came and then run the following as a result, can't stay in loading, pictures can't upload, I put the pictures to the space, to obtain a great god more than one click links, thank you, http://m.qpic.cn/psb?/V14FPwgz1uK1b8/wOnTnO59r DK3 cHOvcR * * * GvQPXunToJp8s1 AXVSupM!/b/dFUAAAAAAAAA& Bo=ywKzAQAAAAADB1k! & Rf=viewer_4

CodePudding user response:

May be bootrom in the startup phase hang up

CodePudding user response:

reference 1st floor embedded007 response:

feel may be the bootrom in the start stage to hang down

Is what reason, config. H configuration is there a problem?

CodePudding user response:

From the perspective of the configuration of the bootrom, start from the hard disk, the first position in bootline pause, press? Check whether the hard disk is identified, if have the hard disk and hard disk partition didn't write the name of the fault, placing the correct hard drive ag mirror, so should be BSP configuration problem, is not only the config. H configuration problems

CodePudding user response:

See the FTP opened not, path set right