# # * * - DELL laptop mechanical hard disk in solid state hard drive after installation system cannot be started and cannot be started after the modification of drive size solution process share * *
Colleagues today bought a SSD m. 2 interface, this installation to the desktop, the desktop SATA3 interface solid-state drives in the notebook, he wanted me to desktops and laptops installation system,
But here I do wrong one thing, I don't have directly to desktops SATA3 solid-state hard disk system migration to m. 2, just got the laptop installation, later will host at the same time apart, don't know how to install, finally cannot be started, again and again to restart, the screen can't bright, so I'm also a little guilty,
The SATA3 solid after install, installed the system cannot be started, was turned on in the following show "unable to find a need to restart the equipment", plug in usb boot disk, reshipment still cannot be started again, changed or not, after a few U start software * * here is the key step, after installed the system into the PE system, see the system disk is E plate * * is WIN10 system should be installed, but the PE production is doing the standard version, boot after repair or cannot be started, about six hours, read blogs, in hard disk after should want to hard disk formatting, first delete all, partition again (independent advice partition) the area appeared system F C software E document, again make WIN10 U disk after startup disk, install WIN10 system reboot, finally launched
Activate the system, install the office, feel the size of the disk C is too small, but the installation disk C PE system deleted, use U disk to start the PE, partition assistant after changed the size of the drive, but can't use the DIS... This software to break up, he will be prompted to remove existing plate, to break up, it's not, I'll use another partition assistant, the judgment after compression, segmentation is a bit to disk C
But was unable to start again after the restart, found two U disk to start the tool, fixes the boot file, change the BIOS Settings, or cannot be started,
I think this is have to reinstall the system again, you in despair, now I have made a WIN10 U startup disk, the reassuringly system disk finally appeared to disk C * * * *
To repair the guide again, finally boot, thrilled,
Dell laptop installation system is lenovo computer trouble is much, a little bit I think